User Manual
Table Of Contents
- Contents
- Introduction
- Charging and Powering
- Bluetooth® Connectivity
- Wearing This Product
- Operation (Audio Playback and Phone Calls)
- Dedicated Application
- Troubleshooting
- Read this first
- Cannot connect
- Power will not turn on
- The product cannot be charged
- The product does not operate or play back
- No sound can be heard
- Sound can only be heard from one earbud
- Sound is not good or sounds strange
- The sound is distorted, noisy or choppy
- Using only one of the earbuds
- Initializing (performing a factory reset)
- Updating the firmware
- List of support centers
- Appendix
1 Activate Bluetooth on your Android device.
2 Remove earbud (L) and (R) from the charging case and bring them near your
Android device.
A notification will be shown on your Android device.
3 Tap the notification on your Android device.
The device will then finish pairing with this product.
The indicator on the primary earbud will light up blue for 10 seconds, and you will hear the
“Pairing Successful” and “Connected” audio messages in the earbud.
NOTE
To use Google Fast Pair, you’ll need to configure your Google account and connect to a network.
Related links
(
“Pairing with a Different Device”(p.20)
(
“Connecting to a Device Already Paired”(p.22)
(
“About the “Headphone Control” app”(p.31)
(
“Using only one of the earbuds”(p.44)
19
Bluetooth® Connectivity > Pairing for the First Time