User Manual
Table Of Contents
- Contents
- Introduction
- Charging and Powering
- Bluetooth® Connectivity
- Wearing This Product
- Operation (Audio Playback and Phone Calls)
- Dedicated Application
- Troubleshooting
- Read this first
- Cannot connect
- Power will not turn on
- The product cannot be charged
- The product does not operate or play back
- No sound can be heard
- Sound can only be heard from one earbud
- Sound is not good or sounds strange
- The sound is distorted, noisy or choppy
- Using only one of the earbuds
- Initializing (performing a factory reset)
- Updating the firmware
- List of support centers
- Appendix
Operation (Audio Playback and Phone Calls)
Playing back audio on this product
You can operate this product using the respective keys during playback as follows.
R
L
Function key + (plus) key − (minus) key
Volume controls
(
Turn the volume up
Press the + (plus) key.
(
Turn the volume down
Press the − (minus) key.
Playing back audio
(
Pause/play
Press the function key.
(
Skip to the next track
Press the + (plus) key twice.
(
Go back to the beginning of the track (while in the middle of the track), or back to the previous track (when
at the beginning of a track)
Press the − (minus) key twice.
The operation may differ, depending on the Bluetooth device or app you use.
In-Ear Detection
(
Pause or restart playback
When you remove either earbud (L) or (R), its built-in sensor activates, pausing the audio playback
automatically. The audio automatically starts again when you put the earbuds back on.
25
Operation (Audio Playback and Phone Calls) > Playing back audio on this product