User Manual

88
3017
10
41
480
429
432
461 415 405
GENERAL SPECIFICATIONS
Model
TX6n TX5n TX4n TX6n TX5n TX4n
120V 230V *
1
Output Power 1kHz, THD+N = 1%
2Ω 2750W x 2 2500W x 2 2200W x 2 2750W x 2 2500W x 2 2200W x 2
4Ω 3000W x 2 2200W x 2 1900W x 2 3000W x 2 2300W x 2 2000W x 2
8Ω 1800W x 2 1300W x 2 1100W x 2 1800W x 2 1300W x 2 1100W x 2
4Ω bridge 5500W 5000W 4400W 5500W 5000W 4400W
8Ω bridge 6000W 4400W 3800W 6000W 4600W 4000W
1kHz, 20ms burst
2Ω 4100W x 2 3480W x 2 2990W x 2 4120W x 2 3600W x 2 3050W x 2
4Ω bridge 8200W 6960W 5980W 8240W 7200W 6100W
High Impedance 100V Line - 1250W x 2/8Ω - - 1250W x 2/8Ω -
Voltage Gain RL=8Ω 43.8dB ~ 19.8dB, 0.1dB step
Input Sensitivity RL=8Ω 0.0dBu ~ 24.0dBu,
0.1dB step
-1.4dBu ~ 22.6dBu,
0.1dB step
-2.6dBu ~ 21.4dBu,
0.1dB step
0.0dBu ~ 24.0dBu,
0.1dB step
-1.4dBu ~ 22.6dBu,
0.1dB step
-2.6dBu ~ 21.4dBu,
0.1dB step
S/N Ratio
20Hz~20kHz, DIN AUDIO
AES/EBU [INPUT] to [SPEAKER] output
108dB 107dB 106dB 108dB 107dB 106dB
Power Consumption
1/8 power (2Ω pink noise) 1800W 1600W 1500W 1800W 1600W 1500W
Idle 75W 75W 75W 75W 75W 75W
Standby 20W 20W 20W 20W 20W 20W
THD+N 20Hz~20kHz, 1/2 power, RL=4Ω Less than 0.2%
Frequency Response RL=8Ω, Po=1W, 20Hz - 20kHz +0dB, -1.0dB
Crosstalk
1kHz, half power, 8Ω
Att. max, input 600Ω shunt
Less than -65dB
Damping Factor RL=8Ω, ≤100Hz More than 300
Maximum Input Level +24dBu
Input Impedance 20kΩ (balanced), 10kΩ (unbalanced)
Signal Delay Fs=96kHz 0.729ms (Analog input to Speaker output)
Controls Front Panel POWER switch x 1 (rocker), Rotary encoder x 2, Function button x 4, HOME button x 1, EXIT button x 1, ENTER button x 1, Mute button x 2
Connectors
Analog input
In XLR-3-31 type x 2
Thru XLR-3-32 type x 2
AES/EBU input/output
In XLR-3-31 type x 1 (2 channels, 24-bit 96kHz ~ 44.1kHz)
Thru XLR-3-32 type x 1 (2 channels)
Out XLR-3-32 type x 1 (2 channels, 24-bit 96kHz ~ 44.1kHz)
Speaker output Neutrik® SPEAKON® NL4 x 2, 5-way binding post x 2 pairs
Network RJ45 x 1
Fault output Euroblock connector x 1 (3P)
Indicators IDENTIFY, NETWORK, PROTECTION, BRIDGE, PARALLEL, POWER, STANDBY, MUTE, ALERT, CLIP, SIGNAL
Load Protection POWER switch on/off mute, DC-fault: Amplifier shuts down automatically, Clip limiting: THD ≥ 0.5%
Amplifier Protection Thermal: Output Mute (heatsink temp ≥ 90°C) (Restored automatically), VI limiter (RL ≤ 1Ω) : Limit the output
Power Supply Protection Thermal: Amplifier shuts down automatically (heatsink temp ≥ 100°C)
Cooling Fan Variable speed fan x 2
Power Requirements 120V, 220V-240V; 50Hz/60Hz (120V models use 30A twist lock connector)
Dimensions (WxHxD) 480 X 88 X 461mm (18-7/8" x 3-7/16" x 18-1/8")
Weight 16kg (35.3lbs)
Included Accessories Handle x 2, Flat-head screw x 4, Euroblock connector x 1 (3P), Owner's manual
DIMENSIONS
unit : mm
TXn Series
*1. Output power depends on the power supply voltage. These figures are based on 230V. If the power supply voltages is 220V, output power can be 8% less that the power shown in the spreadsheet.
Output power can be 7% more in case of 240V.
* Half power = 1/2 power output level