User Manual

Chapter 5 Main panel window
Amp Editor Owner’s Manual
101
Speaker Processor Library Converter
This allows a Speaker Processor component library item (2Way–6Way) created by the DME Designer applica-
tion software to be converted for use with TXn (1Way).
The conversion procedure is described below.
1. In the [Tools] menu, click [Speaker Processor Library Converter...].
A dialog box will appear, allowing you to select the conversion-source library file (file name extension
“.cel”).
2. Select the desired library file, and click the [Open] button.
A dialog box allowing you to specify the save destination will appear.
• You can select more than one library file.
3. Select the save destination, and click the [Save] button.
The library file will be converted for each frequency channel and saved into the destination library file(s)
for each channel. Files that are saved will be named “Original file name _ frequency channel name.ce2”.
• The following abbreviated letter will be added to the frequency channel name based on the
level of frequency:
High (high frequency) = H, Mid-High = M-H, Mid = M, Mid-Low = M-L, Low = L, Sub Low = S-L
NOTE
NOTE