User Manual
Table Of Contents
- Cover
- What is Amp Editor?
- Special Notices
- Contents
- Preparing for operation
- An overview of Amp Editor
- Setup
- Basic operations in Amp Editor
- Main panel window
- Objects in the window and their function
- Menus in the main panel window
- Preferences
- Event Log
- Device Information
- Scene Manager
- Alert Setup
- Word Clock (TXn only)
- Speaker Processor Library Manager (TXn only)
- Clock
- Language (TXn only)
- GPI (ACD1 only)
- Utility
- IP Address
- IP Control Port No.
- Firmware Update (Updating the internal firmware)
- Scene Link Manager (for devices other than XMV)
- Network Setup
- Synchronization (Synchronization with devices)
- Custom Control Panel Manager
- System View Creator
- Speaker Processor Library Converter
- Tree View window
- Detail View window
- Device Properties window
- Signal Path View window (TXn only)
- Component editor (TXn only)
- Custom control panels
- Appendix
Chapter 8 Device Properties window
Amp Editor Owner’s Manual
139
[Input Signal Chain Check] tab (TXn only)
Here you can make settings to specify how a pilot tone supplied from the external device will be detected to
determine whether the input has been interrupted. These settings can be changed when online or offline.
The settings for Analog Input and Slot Input are the same.
q Frequency
Specifies the center frequency of the pilot tone.
w [Monitoring the Pilot Tone] check box
Enables/disables monitoring of whether the input has been interrupted. If this is checked, the Signal Chain
Check warning indicator will light red if a pilot tone above the specified Detection Threshold level could not
be detected within the specified Detection Time.
e Detection Threshold
Specifies the threshold value for the pilot tone input level.
r Detected Level
Indicates the input level of the pilot tone currently being received.
t Detection Interval Time
Specifies the detection time for the pilot tone.
If the pilot tone was not detected within the specified time interval, it will be determined that the input has
been interrupted.
w
q
e
r
t
y