User Manual
Table Of Contents
- Cover
- What is Amp Editor?
- Special Notices
- Contents
- Preparing for operation
- An overview of Amp Editor
- Setup
- Basic operations in Amp Editor
- Main panel window
- Objects in the window and their function
- Menus in the main panel window
- Preferences
- Event Log
- Device Information
- Scene Manager
- Alert Setup
- Word Clock (TXn only)
- Speaker Processor Library Manager (TXn only)
- Clock
- Language (TXn only)
- GPI (ACD1 only)
- Utility
- IP Address
- IP Control Port No.
- Firmware Update (Updating the internal firmware)
- Scene Link Manager (for devices other than XMV)
- Network Setup
- Synchronization (Synchronization with devices)
- Custom Control Panel Manager
- System View Creator
- Speaker Processor Library Converter
- Tree View window
- Detail View window
- Device Properties window
- Signal Path View window (TXn only)
- Component editor (TXn only)
- Custom control panels
- Appendix
Chapter 4 Basic operations in Amp Editor
Amp Editor Owner’s Manual
30
Using Scene Link to switch the settings of multiple amplifiers simul-
taneously
If you use Scene Link to associate the scenes of multiple amplifiers, the scenes of multiple amplifiers can be
stored/recalled simultaneously.
18.
In the main panel window, click the [Scene Link Manager] button.
The “Scene Link Manager” dialog box will open.
19.
In the Scene Link list, click [01 [No Data]] to select it.
If 01 is not [No Data], select any scene link that indicates [No Data].
20.
Select the [Store Amp Scenes When Storing a Scene Link] check box.
When you store the scene link, the scene of the corresponding amplifiers will also be stored.
[Change Scene Link] button
[Scene Link Manager] button