User Manual

Chapter 10 Component editor (TXn only)
Amp Editor Owner’s Manual
151
Operation mode and Design mode
The component editor and the custom control panel (page 179) will operate in either “operation mode” or “design
mode.” Operation mode lets you edit the parameters, and Design mode lets you lay out controls in your custom
control panel.
To switch between Operation mode and Design mode, use the context menu that appears when you right-click in
the component editor or custom control panel window. Use the [Design Mode] command to turn Design mode
on/off. A check mark is shown by this item if you’re in Design mode. If a check mark is shown, selecting this
command will turn Design mode off, returning to Operation mode.
• In the component editor, you can select controls to copy to your custom control panel. You can <Shift> +
click to select multiple controls.
Operation mode
Design mode
NOTE