User Manual
Table Of Contents
- Cover
- Contents
- Introduction
- Controls and Connectors
- Panel Operations
- Basic Operations
- Screen Structure
- Operations that can be Performed from the Panel
- Alert Messages
- HOME Screen
- METER Screen
- SETTING Screen
- UTILITY Screen
- MENU Screen
- SIGNAL PATH Screen
- SIGNAL PATH Block Diagrams
- Recalling library settings (Speaker Processor only)
- Slot Input Router
- Input On/Off
- 4x4 Matrix Mixer
- 8Band Input EQ
- Input Delay
- Oscillator Mix
- X-Over Input Level (Speaker Processor)
- X-Over Polarity (Speaker Processor)
- X-Over (Speaker Processor)
- Output Delay (Speaker Processor)
- 6Band Output EQ (Speaker Processor)
- Output Level (Speaker Processor)
- Mute On/Off (Speaker Processor)
- Limiter (Speaker Processor)
- Output Router
- SCENE Screen
- Initializing the internal memory
- System Connection Examples
- Connecting External Controllers and Analog Devices
- Adjusting the Input/Output Levels
- Appendix
TX6n/5n/4n Reference Manual
41
Panel Operations
■ Storing a scene
Here’s how to store the amplifier’s settings in a scene 01–49.
1. In the HOME screen, press the right-most function button (SCENE) to access the SCENE screen.
2. Use encoder A to select the scene number that you want to store.
3. Press the second function button from the left (STORE).
The store confirmation screen will appear.
• If the scene is protected, it is not possible to store the scene. Press the second function button from the right (EDIT) to
turn protect Off before you store.
4. Use encoder A to move the cursor to the scene name, and turn encoder B to access the screen where you can
specify the scene name.
5. Specify the scene name by using encoder A to move the cursor location and using encoder B to select the
desired characters.
You can also use the function buttons to insert a character at the cursor location (INS), or to delete a character (DEL).
6. When you’ve finished specifying the scene name, press the second function button from the left (OK) to
return to the confirmation screen.
7. As necessary, use encoder A to select Protect and encoder B to turn the protect setting on/off.
8. Press the [ENTER] button to execute the Store operation.
The number of the stored scene is highlighted (the current scene) in the SCENE screen.
NOTE