Owner's Manual

Explanation of functionality added

in version 1.20

Changes to version 1.20

This supplementary explanation covers new functionality added in version 1.20.

Version 1.20 adds the setting of the strong WPA/WPA2 security format. It is more secure than the WEP format

adopted in the past.

Related changes:

• The Wireless LAN screen has changed

● Wireless LAN Page

The settings here are necessary only when using a USB wireless LAN adaptor. Make sure to set them to the same set-

tings as that of the Access Point.

You can select the desired item by using the [DATA ENTRY] dial and the [ENTER] button.

To actually apply all settings changed in the Wireless LAN Page, press the [7 ▲▼] (SAVE)

button.

To cancel, press the [8 ▲▼] (CLOSE) button.

•For details on how to check the version, refer to the owner’s manual.

•Please check the following website for details on how to update.

http://music.yamaha.com/download/

•Some USB wireless LAN adaptors do not support WPA. For a list of USB wireless LAN adaptors whose compatibility have

been conﬁrmed by Yamaha, refer to the Yamaha website:

http://music.yamaha.com/download/

All illustrations and screens shown in this document are for explanatory purposes, and may differ from what you actually see.

Wireless networks Calls up the access point list. Select the desired access point by using the [B]/[C] buttons

and press the [G] (OK) button.

SSID Determines the SSID setting. (SSID is an identiﬁcation name for specifying a particular

network over a wireless LAN connection.)

Channel Determines the channel.

Security Determines the security.

• NONE

• WEP

• WPA-PSK (TKIP)

• WPA-PSK (AES)

• WPA2-PSK (TKIP)

• WPA2-PSK (AES)

KeyDetermines the key. This setting must be made when a security setting above (other than

NONE) is enabled.

PAGE 1
Explanation of functionality added in version 1.20 Changes to version 1.20 This supplementary explanation covers new functionality added in version 1.20. Version 1.20 adds the setting of the strong WPA/WPA2 security format. It is more secure than the WEP format adopted in the past. Related changes: • The Wireless LAN screen has changed ● Wireless LAN Page The settings here are necessary only when using a USB wireless LAN adaptor. Make sure to set them to the same settings as that of the Access Point.
PAGE 2
About Using BSD-Licensed Software The software used by this product includes components that comply with the BSD license. The restrictions placed on users of software released under a typical BSD license are that if they redistribute such software in any form, with or without modification, they must include in the redistribution (1) a disclaimer of liability, (2) the original copyright notice and (3) a list of licensing provisions.