Operation Manual

OIL PUMP
4-67
6. Install:
• Oil pump cover 1
• Plain washer 2
• Bolt (oil pump cover) 3
T 8 Nm (0.8 mdkg, 5.8 ftdlb)
NOTE:
While turning the oil pump gear shaft, install
the oil pump cover.
7. Install:
• Strainer 1
• Screw (strainer) 2
T 7 Nm (0.7 mdkg, 5.1 ftdlb)
NOTE:
Strainer is installed with the mesh a facing
outward.
ENG