Operation Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
6-5
6
ODOMETER READING
CHECK OR ANNUAL
NO. ITEM MAINTENANCE JOB
1000 km 6000 km 12000 km 18000 km 24000 km
CHECK
(600 mi) (3500 mi) (7000 mi) (10500 mi) (14000 mi)
• Check operation and for
9*Swingarm
excessive play.
√ √√ √
• Lubricate with lithium-soap-
based grease.
Every 24000 km (14000 mi)
• Check chain slack, alignment
and condition.
Every 500 km (300 mi) and after washing
10 Drive chain • Adjust and lubricate chain with
the motorcycle, riding in the rain or riding in wet areas
a special O-ring chain lubricant
thoroughly.
• Check bearing play and steering
11 * Steering bearings
for roughness.
√√ √√ √
• Lubricate with lithium-soap-
based grease.
Every 50000 km (30000 mi)
12 * Chassis fasteners
• Make sure that all nuts, bolts and
screws are properly tightened.
√ √√ √ √
13
Brake lever pivot
shaft
• Lubricate with silicone grease. √ √√ √ √
14
Brake pedal pivot • Lubricate with lithium-soap-
shaft based grease.
√ √√ √ √
15
Clutch lever pivot • Lubricate with lithium-soap-
shaft based grease.
√ √√ √ √
16
Shift pedal pivot • Lubricate with lithium-soap-
shaft based grease.
√ √√ √ √
• Check operation.
17 Sidestand • Lubricate with lithium-soap- √ √√ √ √
based grease.
18 * Sidestand switch • Check operation. √√ √√ √ √
1HD-F819D-E0 7/3/11 20:27 Página 42
2AS-F819D-E0.indd 42 31/07/12 10:09