User Guide

ManualsBrandsYAMAHA ManualsElectronic KeyboardsWIFI USB/MIDI Adapter

The UD-WL01 USB Wireless LAN Adaptor allows you to easily establish a wireless connection between your

instrument and your smart device, such as an iPhone, iPad, or iPod touch, or your computer. With this setting and

the help of some specific applications, you can manage your music files more easily and take advantage of various

functions — expanding the potential of your instrument and making it even more integral part of your total music

life.

NOTE In this manual, iPhone, iPad, and iPod touch are hereafter collectively called a smart device.

NOTE The UD-WL01 can be used with Yamaha products having wireless-LAN capability. For information on UD-WL01 compatible products,

visit the UD-WL01 product page on the Yamaha website.

Setting up

1. Turn off the power to the instrument.

Quit any open application software on your smart device/computer.

2. Connect the UD-WL01 to the [USB TO DEVICE] terminal of the instrument.

3. Turn on the power to the instrument.

When you are finished with the setup, go on to the next page, and connect your instrument to a network.

Required devices

• USB Wireless LAN Adaptor: UD-WL01

• Access point with router (When your computer is using a modem with router capability, no router is required.)

NOTE When you set your instrument to Accesspoint mode for direct wireless connection between your instrument and your smart device/

computer, no access point is required (see “Choosing the connection type” on page 2).

Access point

An “access point” refers to a device which acts as a base station when data is transmitted/received via a wireless LAN.

Some access points are combined with router or modem functions.

USB Wireless LAN Adaptor: UD-WL01

Connection Manual

Summary of content (6 pages)

PAGE 1
USB Wireless LAN Adaptor: UD-WL01 Connection Manual The UD-WL01 USB Wireless LAN Adaptor allows you to easily establish a wireless connection between your instrument and your smart device, such as an iPhone, iPad, or iPod touch, or your computer. With this setting and the help of some specific applications, you can manage your music files more easily and take advantage of various functions — expanding the potential of your instrument and making it even more integral part of your total music life.
PAGE 2
Choosing the connection type To connect your instrument to a network, you can use one of the four types of connections below. Select one which is most suitable for your network environment. For types (A) through (C), you need to set up an access point. If your access point supports WPS, choose type (A), which makes network connection easier. Access point required: (A) Setting automatically by WPS; Do this when your access point supports WPS (see page 3).
PAGE 3
Infrastructure mode and Accesspoint mode The “Infrastructure” mode uses an access point for data communication, between a USB wireless LAN adaptor and a network. When you select connection type (A), (B), or (C) above, your instrument will be set to this mode. The “Accesspoint” mode allows you to directly connect a USB wireless LAN adaptor and your smart device/computer, without using an access point. With connection type (D) above, your instrument will use this mode.
PAGE 4
(B) Selecting from a network list You can use a network list shown on your instrument’s display to select the network for connecting to your instrument. For details, refer to the Owner’s Manual or the Reference Manual for your instrument, since the operation and setting may vary depending on the instrument used. 1. Call up the wireless LAN display on your instrument, and then go to the network list.
PAGE 5
(D) Using Accesspoint mode You will use your instrument as an access point to achieve a direct wireless connection between your instrument and your smart device/computer. NOTE Only an instrument which has the Accesspoint mode function can serve as an access point. NOTE When your instrument is set to Accesspoint mode, no Internet access is available using a wireless LAN. 1. Call up the wireless LAN display on the instrument.
PAGE 6
Setting your smart device/computer For a smart device: 1. Call up the Wi-Fi display on your smart device by tapping Settings > Wi-Fi. 2. Turn on the Wi-Fi. 3. From the network list shown on the display, tap on the network to which you connected your instrument, or the instrument that you set to Accesspoint mode. If necessary, enter a password, and then connect. For a computer: Set your computer to a wireless network connection. For details, refer to the owner’s manual supplied with your computer.