User Guide

Using the UR22mkII
UR22mkII Operation Manual 14
10. Click [] at the top of the screen to start
recording.
11. Click [] at the top of the screen to stop
recording.
12. Click the Ruler to move the project cursor to
the desired point for starting playback.
13. Click [ R ] at the top of the screen to check the
recorded sound.
When listening to the sound over monitor speakers,
adjust the output signal level by the [OUTPUT] knob on
the device.
The recording and playback operations are now
complete.
For more detailed instructions on using Cubase
series programs, refer to the PDF manual, available
from [Help] in the Cubase series menu.
Programs other than Cubase Series
1. Launch the DAW software.
2. Adjust the input signal level of the
microphone or guitar with the [INPUT GAIN]
knob on the device.
3. Set the [MIX] knob of the device to the
center position between [INPUT] and [DAW].
4. While singing into the microphone or
playing the guitar, adjust the output signal
level of the headphones with the [PHONES]
knob on the device.
5. Start recording on your DAW software.
6. After finishing recording, stop it.
7. Playback the newly recorded sound to
check it.
The recording and playback operations are now
complete.
For more detailed instructions on using the DAW
software, refer to your particular DAW’s software
manual.
HINT
Setting optimum recording levels
Adjust the gain knobs so that the [PEAK] indicator
flashes briefly at the loudest input volume.