User's Manual

7-42
-+
ELEC
3. Fuel level gauge
8 Set the main switch to “ON”.
8 Move the float up 1 or down 2.
8 Check that the fuel level gauge needle moves
to “F” or “E”.
TIP
Before reading the fuel level gauge, leave the
float in one position (either up or down) for at
least three minutes.
8 Does the fuel level gauge needle move ap-
propriately?
YES NO
Replace the speed-
ometer.
4. Wiring
Check the entire signaling system’s wiring.
SIGNALING SYSTEM
This circuit is OK.
2
1
Downloaded from www.ScooterTime.net