User Guide

Installing the Driver

(3) Setting up the OMS driver

1. Start the computer.

2. Make sure that the power to the UX256 is turned off (standby). Then

connect the USB terminal of the computer or the USB hub to the USB

terminal of the UX256.

3. Turn on the power to the UX256. Make sure the red POWER LED and

green USB LED on the UX256 light up steadily.

4. Open the “OMS Applications” folder in the “Opcode” folder installed on

the hard disk, and double-click the “OMS Setup” icon to start the setup

program.

5. If the AppleTalk dialog appears, click [Turn It Off], then click [OK] in the

subsequent dialog box.

6. The system displays the “Create a New Studio Setup” dialog box. If this

dialog box does not appear, select “New Studio Setup” from the “File”

menu.