User's Manual

Page 28/58 RS15 RIGGING INSTRUCTIONS
6.2 Flying RS15 arrays
IMPORTANT
- Maximum allowed RS15 quantity to be flown is 12;
- RS15 bumper rigging point must be adjusted so that bumper always remains
horizontal;
- RS15 flying system forbids angles between adjacent cabinets.
IMPORTANT
RS15 bumper is designed to be flown from one rigging point only.
Motor hoist must be rated to support entire cluster weight.
Required items
• 1 x Bumper (RS15-BUMPER);
• N Pair of RS15 Rigging Plates (RS15-FPLATES) for N cabinets;
• 4xN Quick release pins (BLGEOS) for N cabinets;
• 1 hoist (not provided).
6.2.1 Hoist Rating
N being RS15 quantity within cluster, cluster weight is given by:
W
cluster
= (17kg/38lbs) + Nx(70kg/154lbs)
NB: this formula includes cable weight up to 5kg/11lbs per RS15
Typical cases are:
• 3 RS15 cluster = ¼ ton hoist;
• 6 RS15 cluster = ½ ton hoist;
• 12 RS15 cluster = 1 ton hoist.
6.2.2 Connecting first RS15 to bumper
• Connect bumper to first RS15 flying system link plates; ensure quick release pins are properly
locked;
• Insert axis in center hole
and secure it with provided “R” clips;
• Connect hoist hook to bumper axis and lift assembly so that RS15 is off the ground.