manual

PM1D System Software V1.6 Supplementary Manual
38
4 PAT TERN LINK buttons
Specify whether movements of the sound image will
be linked for the two channels shown in the screen. If
you want them to be linked, use the √ button and ®
button to select one of the eight link patterns.
5 Surround mode select buttons
Select one of the following three surround modes.
• 3-1ch
This mode uses four channels; L (front left), C (front
center), R (front right), and S (surround).
• 5.1ch
This mode uses six channels; L (front left), C (front
center), R (front right), Ls (rear left), Rs (rear right),
and LFE (subwoofer).
• 6.1ch
This mode uses seven channels; the channels of 5.1ch
and a Bs (rear center) channel.
6 Level meters
These meters indicate the master level of the sur-
round buses.
Be aware that the level meters in the SURR PRM
screen show the final levels of the surround buses;
they do not show the send levels that are being sent
from the input channel to the surround bus.
4
5
6
L (front left) C (front center) R (front right)
S (surround)
L (front left) C (front center) R (front right)
LFE (subwoofer)
Ls (rear left) Rs (rear right)
L (front left) C (front center) R (front right)
LFE (subwoofer)
Ls (rear left) Rs (rear right)
Bs (rear center)