manual

PM1D System Software V1.6 Supplementary Manual

Internal settings and operation in surround mode

When either 3-1ch, 5.1ch, or 6.1ch is selected as the surround mode in the SURR PRM screen, the internal settings and

operation of the PM1D system will change as follows.

■ Surround buses

MIX buses 17–24 will be switched to operate as dedicated surround buses. The following surround channels will be

assigned to MIX buses 17–24 according to the currently selected surround mode.

• Surround channel output destination

For example if 6.1ch is selected as the surround mode,

the surround panning signal ﬂow will be as follows.

• Signal ﬂow when surround mode = 6.1ch

Surround

mode

MIX bus 17 MIX bus 18 MIX bus 19 MIX bus 20 MIX bus 21 MIX bus 22 MIX bus 23 MIX bus 24

3-1ch

LRCS————

Front left Front right Front center Surround

5.1ch

LRC—LsRs LFE

Front left Front right Front center Rear left Rear right Subwoofer

6.1ch

LRCBsLsRs—LFE

Front left Front right Front center Rear center Rear left Rear right Subwoofer

MIX 17 (L)

MIX 18 (R)

MIX 19 (C)

MIX 20 (Bs)

MIX 21 (Ls)

MIX 22 (Rs)

MIX 23

MIX 24 (LFE)

INPUT CHANNEL 1

SURROUND

PAN

LFE LEVEL

INPUT CHANNEL 2

SURROUND

PAN

LFE LEVEL

• • • • •