Owner's Manual

Chapter 3 Main Panel Window
DME Designer Owner’s Manual
124
Parameter List
When you click [Parameter List] in the [Tools] menu, the “Parameter List” dialog box is displayed. A list
of parameters in the current configuration of the current zone are displayed. Here you can check
things like the parameter IDs. You can also print the list of parameters.
When the dialog box is opened or when a DME is selected from the [DME] list, the parameter values
are displayed.
■ [DME]
From the list, select the DME that will have its parameters displayed. The DMEs included in the
current configuration are displayed in the list. Components in the selected DME are displayed in
the component list.
Component List
The components and user modules included in the DME, their IDs, and the component parameters
are displayed in hierarchal list. The AD and slot are also displayed.
[ID]
Displays the component or parameter ID.
The following is displayed for the parameter ID: “Element No. : X : Y : Parameter No. : Index No.”
[Value]
Displays the value for the parameter.
NOTE
Components for user modules are also listed in a hierarchal display, but if user module security is enabled, the
components are not displayed. However, parameters displayed in the user module editor are displayed here.