Owner's Manual

Chapter 3 Main Panel Window
DME Designer Owner’s Manual
132
DAW Control
When you click [DAW Control] on the [Tools] menu, the “DAW Control” dialog box is displayed. Here
you can make settings for when the DME is controlled from a DAW controller. This is set for each zone
configuration. The setting can be made only when in offline status.
■ [DME]
From the list, select the DME you want to set. The DMEs included in the current zone are displayed in
the list.
■ [DAW Type]
Select the DAW type. The following choices are in the list: [Off], [Type1], and [Type2].
■ DAW Control Table
The following can be set for each channel from 1 to 64: [Function], [Controller], [Label], [Parameter].
[Function]
Selects the function that will be changed by the DAW controller. If you click here, a list will be
displayed.
NOTE
DAW control editing can be performed only by users for whom the [Edit] security checkbox has been checked.