Owner's Manual

Chapter 3 Main Panel Window
DME Designer Owner’s Manual
177
 Card (Slot Information)
Displays the name of the card inserted into the slot.
 Clock Status
The clock status is displayed using a color code:
 Internal/Word Clock/Cascade
You can select one of the following for the word clock:
* This settings can only be made when the target unit is offline and the DIGITAL IN is selected as the input signal to the
SP2060 unit.
Clock buttons that are grayed out cannot be selected.
 [Close] Button
Closes the dialog box.
Status Meaning
Indicates that there is no input signal.
Indicates there is an input signal and sync is possible with the current word
clock.
Indicates there is an input signal but cannot sync with word clock (clocks are
different).
Indicates that there is no DME or SP2060 unit information.
Device Name Slot Internal
Word
Clock
Cascade Digital
DME64N 1 ~ 4 44.1kHz/48kHz/88.2kHz/96kHz WC IN IN/OUT —
DME24N 1 44.1kHz/48kHz/88.2kHz/96kHz WC IN — —
DME Satellite —
CobraNet/EtherSound: 48kHz/
96kHz
———
SP2060 — 96kHz — — IN(*)
NOTE
You can close the dialog box using the Close button, or by pressing <Esc> or <Alt>+<F4>.
Slot Number
Card Name