Owner's Manual

Chapter 6 Component Guide
DME Designer Owner’s Manual
438
Input Channel Switching
The [Delay Matrix - One Input to All Outputs] editor window displays the input channel for the
channel number clicked on in the delay matrix component editor.
The [Channel] buttons in the [Input] section of the [Delay Matrix - All Inputs to One Output] editor
window switch the channel group that is displayed in the window.
If you make the delay matrix component editor active while the [Delay Matrix - One Input to All
Outputs] editor window is displayed, and then click another input channel, that channel will be
displayed in the [Delay Matrix - One Input to All Outputs] editor window.
One [Delay Matrix - One Input to All Outputs] editor window is displayed for each delay matrix
component editor.
9
Block On -- Turns ON send to all channel buses. When turned
ON, the [On] button lights up.
)
Off -- Turns OFF send to all channel buses.
!
Nominal -- Resets all send levels, making them 0 dB.
@
Minimum -- Resets all send levels, making them -∞ dB.
Section Parameter Setting Range Function