Owner's Manual

Chapter 2 DME Designer Overview
DME Designer Owner’s Manual
52
When going online is finished, the [Go On-line] button will be grayed out, and the Main Panel
window [On-Line] button will light up. At this point if the [Store Project File into DME after
synchronization] item is checked, the project file will be automatically transferred to the DME unit
and stored. And if the [Close this window after synchronization] item is checked, the window will
close automatically.
To go off line, click either the [ON-Line] button in the main panel window, or the [Go Off-line] button
in the “Synchronization” dialog box.
NOTE
It may not be possible to go online if a scene has not been stored when [Recall Safe] is selected.
NOTE
If LAN cable connections are changed while DME Designer is running, the DME units will continue to attempt to connect
to the original computer. If it is necessary to switch computers, either quit DME designer before changing the
connections or set the Port parameter to No Assign.