Guide
Dante Controller User Guide
Copyright © 2018 Audinate Pty Ltd. All rights reserved.
-14-
Component Recommended Minimum Requirement
Network Standard wired Ethernet network interface (100Mbps or Gigabit) or wireless LAN (Wi-
Fi) interface
Windows
Component Recommended Minimum Requirement
Operating
System
Windows 7 (SP1 and above), 8.1 and 10
NOTE: Both UTF-8 and Unicode are supported EXCEPT for host or device names;
the DNS standard does not support Unicode for these
Mac OSX
Component Recommended Minimum Requirement
Operating System Mac OS X 10.11.6, 10.12.6 and 10.13
NOTE: Intel architecture only; PPC architecture is not supported
Note: If you intend to also install Dante Virtual Soundcard on the same machine as Dante Controller,
you will require a machine which meets the minimum system requirements for Dante Virtual
Soundcard.
OperatingSystem Updates
Ensure your PC or Mac has the latest Windows or Apple updates installed.
Firewall Configuration
Firewall configuration for Windows Firewall and Mac OS X built-in firewall is automatically handled during
installation.
Dante Controller communicates over UDP over the following ports:
n Dante Control and Monitoring: 8700-8708, 8800
If you are using a third-party firewall product, use the port information provided above to configure it
accordingly.
Monitor Requirements
n A display resolution of at least 1024 x 768, with a screen size of at least 19” is recommended for
Dante Controller.