Guide

Dante Controller User Guide

-41-

n Network Status

n Events

The use of each of these tabs is described in the next section.

Status Bar

The Status Bar displays notifications for network status, general device events, and clock status events,

plus the current Dante audio multicast bandwidth on the network.

DDMNetworks

In DDMnetworks, the devices displayed in the Network View will vary according to the selected domain.

See Viewing Domains in Dante Controller for more information.

When logged into a domain that includes legacy (pre-v4.0 firmware) devices, those devices are displayed

with gray highlighting instead of blue.

Shared devices are displayed with green highlighting and green text. See the DDMuser guide for more

information about sharing audio in DDM networks.

Status Bar

The Status Bar displays the following information:

n P: The current status of the Primary network. Green indicates that Dante Controller is currently con-

nected to the primary Dante network. Red indicates a problem with the connection.

n S: The current status of the Secondary Dante network. Only displayed where a secondary network is

connected.

n Multicast Bandwidth: The current Dante audio multicast bandwidth on the connected networks.

Note that there may be network traffic from other sources that is not included in the multicast band-

width reading.

n Event Log: Indicates the current status of the event log. Click the icon to open the Events View.

n Clock Status Monitor: Indicates the current status of the Clock Status Monitor. Click the icon to

open the Clock Status Monitor.