Owner`s manual

Basic Setup
DME Setup Manual 10
4 Creating scenes
In order to transmit all data created thus far to a DME
unit, it is necessary to store at least one scene. The
scene store procedure is outlined below.
4-1 Click the [Scene Manager] button from
the Main Panel window to display the
“Scene Manager” dialog box.
4-2 Click the [Store] button in the “Scene
Manager” dialog box.
4-3 Click the [OK] button.
5 Going On-Line
When synchronization with the DME unit has been
achieved and the connection is online, the DME
Designer settings are written to the DME unit.
5-1 Click the [Communication Port] button
from the Main Panel window to display
the “Communication Port” dialog box.
5-2 When the “Communication Port”
dialog box is displayed, ensure that the
Tx, Rx, and Device Group settings are
as shown below. When “No Assign” is
selected for Port 1, click the item and
select an appropriate option from the
list that appears.
n If the appropriate option list does not appear
even though the USB-MIDI driver is installed,
check that the DME unit is properly connected
to the computer.
5-3 Click the [On-line] button from the Main
Panel window.