Guide

Yamaha Professional Audio QL StageMix V8 User Guide
Page 13
ii. Tap on the blank Name field and enter a name for your QL series
console using the iPad’s onscreen keyboard.
iii. Enter the QL series console’s IP address noted in 3.1. The default IP
Address may not need to be changed but confirm this in the Network
Setup screen of the QL series console (refer to
3.1). If you need to
modify the IP Address in StageMix, make sure you include the dots
between the sets of numbers (as shown above). If the entered console
IP address is in a compatible range with the iPad’s current IP address
(displayed beneath), a green tick will be displayed to the right of the
console IP address. If the entered IP address is in-compatible range
with the current IP address of the iPad, a red cross is displayed –
please enter a console IP address in a compatible range.
Please note, having a green tick displayed does not mean that the
entered console IP address for the console is accurate or that the
console has been automatically detected. Please check the console for
the currently assigned IP address to ensure that the correct address is
being entered into StageMix.
iv. Select the Model of QL series console.
v. Press the [ADD MIXER] button at the bottom of the screen.
Note: From StageMix V6 onwards, it is no longer necessary to enter the
console MAC Address.
3.3.3 Select a Mixer
If your iPad has been configured to work with a QL series console,
select the mixer from the list. (The model of mixer (QL1 or QL5) will
appear in smaller text below the mixer’s name.)
3.3.4 Connect and Synchronize with the QL Console
Click the [CONNECT] button to connect to the console and begin the
synchronization process.