Guide

Yamaha Professional Audio QL StageMix V8 User Guide
Page 26
Touch on this button to switch the HA channel strip to the RF control
and monitoring view. The channel strip will turn purple to indicate that it
is now displaying an RF channel, and the button above the meter will
display RX to indicate that the HA fader is now controlling RX gain.
If the non-Dante Wireless Microphone system includes TX gain control,
press the RX button again to switch the channel strip to show the TX
gain parameter on the HA fader. If the TX gain is not available, no fader
will be shown. All other control and monitoring functions remain the
same as a Dante based RF input channel
To return to the analog HA input fader strip, touch again on the RX/TX
button.
Refer to section 4.10.9 for details of the available RF control and
monitoring functions.
4.10.11 Input Port Patching
To access Input Port Patching control, double tap on the port display
label above the Phase control button for the desired input channel. This
will open the Input Port Patch view.