Guide

Yamaha Professional Audio QL StageMix V8 User Guide
Page 65
If there is a current assigned patch, this will be displayed in the patch
view on the patch button grid, and shown in the top line of the small
window at the centre-top of the patch view the second line will display
the currently selected output port.
In the below example, the top line shows that (Mix1) is the current
patch source for the selected Output Port (Dante 1).
To change to a different output port, use the left/right arrows on either
side of this window. To directly navigate to a specific output port, press
and hold on either arrow to open a pop-up view and select an output
port.
To edit the patch source for the currently output port, first select an
output bus type from the bottom line of the view.
To scroll to further output bus types, tap on the bar above the type
selection buttons. The small dots in the bar will indicate the current
scroll position.
Once an output type has been selected, touch on the desired output
number from the grid.