Guide

Yamaha Professional Audio QL StageMix V8 User Guide
Page 9
3.0 Getting Started
3.1 QL series Network Setup
Connect the Wi-Fi access point to the QL series console’s network port via a
CAT5 cable.
Make sure your Ethernet cable is connected to a LAN port on your Wi-Fi
device and not the WAN port.
Note the IP address of the QL series console - this will need to be entered into
the iPad later. It can be found in the console as follows:
a. Press the [SETUP] button on the QL series touchscreen
b. Press [NETWORK] on the QL series touchscreen
3.2 iPad Wi-Fi Settings
The iPad can be configured using either DHCP or a Static IP address.
3.2.1 Using DHCP
Dynamic Host Configuration Protocol (DHCP) is a network protocol that
enables a server to automatically assign an IP address to a device. It is
recommended to use DHCP. Use the following steps to configure your
iPad using DHCP.
a) Open the iPad “Settings” menu
b) Select “Wi-Fi”, and choose the correct Wi-Fi Access Point under
“CHOOSE A NETWORK…”