VCD-100K NATURAL SOUND VIDEO-CD CHANGER NATURAL SOUND VIDEO CD CHANGER VCD I00K PLAYXCHANGE OPEN/CLOSE 5–Disc Carousel STOP/RETURN VIDEO CD Digital Echo / 11 Step Key Control MPX KARAOKE PLAY/SELECT Version 2.
Thank you for selecting this YAMAHA Video-CD changer. This unit can play discs of the following types only.
1 To ensure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. 2 Install your unit in a cool, dry, clean place – away from windows, heat sources, and too much vibration, dust, moisture or cold. Avoid sources of hum (transformers, motors). To prevent fire or electrical shock, do not expose to rain or water. WARNING To reduce the risk of fire or electric shock, do not expose this unit to rain or moisture.
CONNECTIONS ● ● Before making any connections, switch OFF the power to this unit, the amplifier, the video monitor, etc. Connections should be made to the correct input terminals of the amplifier, the video monitor, etc. ● If the placement of this unit causes interference to other equipment, separate them from each other.
English Setting the VIDEO OUT MODE SELECT switch This unit is designed for use with the NTSC and PAL television formats. Set this switch to the position suitable for the use of this unit you plan. PAL: VIDEO OUT Outputs signals in the PAL format no matter which format (PAL or NTSC) the currently playing disc employs. Set to this position if your video monitor employs the PAL format. 1 MODE SELECT AUTO AUTO: Outputs signals in the same format as the currently playing disc employs.
CONTROLS AND THEIR FUNCTIONS FRONT PANEL 1 23 4 5 6 78 90 NATURAL SOUND VIDEO CD CHANGER VCD I00K PLAYXCHANGE OPEN/CLOSE 5–Disc Carousel STOP/RETURN VIDEO CD Digital Echo / 11 Step Key Control MPX KARAOKE PLAY/SELECT Version 2.
English 1 Disc tray Up to 5 discs can be loaded on the disc tray. Five disc-setting positions on the disc tray are numbered from 1 to 5. 9 OPEN/CLOSE button 2 MPX button Pressing this button starts a disc play. If this button is pressed while playing a disc, play will restart from the begining of the track currently playing. When this unit is in a Playback Control mode, pressing this button selects a screen menu mode. Whenever this button is pressed, audio output mode changes.
DISPLAY PANEL 1 2 3 4 KARAOKE VIDEO CD PBC PROG AUTO NTSC PAL 8 DISC 5 6 MUSIC 9 L R 7 VC 0 1 VIDEO CD indicator Lights up when the selected disc is a Video-CD. 7 Time display 2 KARAOKE indicator Lights up when the KARAOKE function is turned on by pressing the KARAOKE button, and goes off if the KARAOKE button is pressed once more. 8 PBC (Playback Control) indicator Shows elapsed time of the track currently playing, program number and so on.
English This manual mainly describes how to operate this unit by using the remote control transmitter. To operate this unit from the front panel, use the same named buttons on the front panel.
To play a desired track PROG OPEN/ CLOSE KARAOKE 2 STOP/ RETURN MPX CANCEL ENTER 1 2 3 4 5 6 7 8 9 3 0 INDEX DISC SKIP PREV SKIP NEXT SEARCH 1 KEY CONTROL STOP RETURN PLAY/REPEAT SELECT 3 Selecting a track (by using the numeric buttons) 1 If necessary, select a desired disc. DISC SKIP For example: To select track 5 Press “5”. * If you want to play from the first track on the disc, press the PLAY/REPEAT button.
To advance or reverse play rapidly (Manual search) To advance rapidly PLAY/REPEAT SEARCH SELECT (press and hold) To reverse rapidly SEARCH To skip to the beginning of a desired track (press and hold) • ● To play from the beginning of the track following the one currently playing PREV SKIP NEXT • • ● To play from the beginning of the track currently playing The sound can be heard (although slightly garbled) during manual search in either direction.
Adjustments for enjoying Karaoke PROG OPEN/ CLOSE KARAOKE MPX CANCEL ENTER MPX 1 2 3 4 5 6 7 8 9 PLAYXCHANGE STOP/RETURN VIDEO CD Digital Echo / 11 Step Key Control PLAY/SELECT Version 2.
English PRE-PROGRAMMING SELECTIONS (FOR SINGING KARAOKE) ● ● 3 9 6 PROG OPEN/ CLOSE 2 KARAOKE 5 MPX CANCEL ENTER 1 2 3 4 5 6 7 8 9 Programming is possible either while the unit is playing a disc or stopped. As many as 10 selections can be stored at one time. PLAYXCHANGE STOP/RETURN VIDEO CD 0 OPEN/CLOSE PLAY/SELECT Version 2.
Display information during programming KARAOKE VIDEO CD PROG AUTO DISC MUSIC L ➀ ➁ R Shows the program number for the track to be programmed next. Shows the selected disc and track number.
English PROG OPEN/ CLOSE KARAOKE 2 MPX CANCEL ENTER 1 2 3 4 5 6 7 8 9 1 3 0 INDEX DISC SKIP PREV SKIP NEXT SEARCH KEY CONTROL STOP RETURN To cancel a programmed selection 1 CANCEL The disc number and the track number of the last selection will flash on the display. 2 PLAY/REPEAT SELECT To cancel the selection you are currently programming There are two methods, as described below. 1) Press the CANCEL button instead of the ENTER button after the track number is selected.
PLAYBACK CONTROL OF VIDEO-CD (Ver. 2.0) Playback Control provides you with two types of new playback enjoyment. This function is available for Video-CDs, version 2.0 only. “PBC” will light up on the display when a version 2.0 disc is used. The Playback Control differs with each disc. This section gives a basic explanation of Playback Control. Refer to the instruction manual for the disc for details.
English Basic operation Note Disc play in the Playback Control mode depends on the data of the disc used. So, according to the contents of disc, the following operating method may not be applied to the disc. Be sure to refer to the instruction manual for the disc. Before operation If “KARAOKE” is illuminated on the display, press the KARAOKE button to cancel it. (When “KARAOKE” is illuminated, a Playback Control operation cannot be made.
To stop play To return to a previous screen mode during play STOP RETURN STOP RETURN Press and hold for more than 2 seconds. Press once. * To return to the first screen mode, press the STOP/RETURN button repeatedly until the first screen mode appears. If the disc has index numbers Pressing the INDEX or button once or more searches for and select any index number. Play starts from the point of selected index number. To play a Video-CD (ver. 2.
Battery installation English NOTES ABOUT THE REMOTE CONTROL TRANSMITTER Remote control transmitter operation range 1 3 Remote control sensor 2 Within approximately 7m (23 feet) Battery replacement If you find that the remote control transmitter must be used closer to the main unit, the batteries are weak. Replace both batteries with new ones. Notes ● Use only AA, R6, UM-3 batteries for replacement. ● Be sure polarities are correct. (See illustration inside battery compartment.
TROUBLESHOOTING If the unit fails to operate normally, check the following points to determine whether the fault can be corrected by the simple measures suggested. If it cannot be corrected, or if the fault is not listed in the SYMPTOM column, disconnect the power cord and contact your authorized YAMAHA dealer or service center for help. SYMPTOM REMEDY PROBABLE CAUSE This unit does not switch ON when the POWER switch is pressed. The power cord is not connected or not completely connected.
YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, D-25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE ELECTRONICS (UK) LTD.
