OWNER’S MANUAL YJ125X LIT-11626-21-54 5YR-F8199-14_ch0cv.
1 2 3 EAU10041 4 5 6 7 8 9 5YR-F8199-14_ch0cv.
EAU10050 INTRODUCTION EAU10090 Congratulations on your purchase of the Yamaha VINO125. This model is the result of Yamaha’s vast experience in the production of fine sporting, touring, and pacesetting racing machines. It represents the high degree of craftsmanship and reliability that have made Yamaha a leader in these fields. 1 This manual will give you an understanding of the operation, inspection, and basic maintenance of this scooter.
EAU10122 IMPORTANT MANUAL INFORMATION EAU35821 Particularly important information is distinguished in this manual by the following notations: Q The Safety Alert Symbol means ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED! 2 w Failure to follow WARNING instructions could result in severe injury or death to the scooter operator, a bystander, or a person inspecting or repairing the scooter. 3 cC A CAUTION indicates special precautions that must be taken to avoid damage to the scooter.
EAU10122 IMPORTANT MANUAL INFORMATION 1 2 AFFIX DEALER 3 LABEL HERE 4 5 EAUT2190 VINO125 OWNER’S MANUAL ©2007 by Yamaha Motor Corporation, U.S.A. 1st edition, July 2007 All rights reserved. Any reprinting or unauthorized use without the written permission of Yamaha Motor Corporation, U.S.A. is expressly prohibited. Printed in Taiwan. P/N LIT-11626-21-54 5YR-F8199-14_ch0cv.
EAU10210 TABLE OF CONTENTS SAFETY INFORMATION ................... 1-1 Further safe-riding points ............... 1-4 Location of important labels ........... 1-6 1 2 3 4 5 6 7 8 9 DESCRIPTION ................................... 2-1 Left view ......................................... 2-1 Right view ....................................... 2-2 Controls and instruments ............... 2-3 INSTRUMENT AND CONTROL FUNCTIONS ................................................ 3-1 Main switch/steering lock .........
EAU10210 TABLE OF CONTENTS SPECIFICATIONS ............................. 8-1 CONSUMER INFORMATION ............ 9-1 Identification numbers .................... 9-1 Reporting safety defects ................. 9-3 Motorcycle noise regulation ............ 9-4 Maintenance record ........................ 9-5 YAMAHA MOTOR CORPORATION, U.S.A. RIVA LIMITED WARRANTY ................................ 9-7 YAMAHA EXTENDED SERVICE (Y.E.S.) ........................................ 9-9 1 2 3 4 5 6 7 8 9 5YR-F8199-14_ch0cv.
Safety information Q SAFETY INFORMATION EAU10261 1 2 3 4 5 6 7 8 9 SCOOTERS ARE SINGLE TRACK VEHICLES. THEIR SAFE USE AND OPERATION ARE DEPENDENT UPON THE USE OF PROPER RIDING TECHNIQUES AS WELL AS THE EXPERTISE OF THE OPERATOR. EVERY OPERATOR SHOULD KNOW THE FOLLOWING REQUIREMENTS BEFORE RIDING THIS SCOOTER. HE OR SHE SHOULD: 8 OBTAIN THOROUGH INSTRUCTIONS FROM A COMPETENT SOURCE ON ALL ASPECTS OF SCOOTER OPERATION. 8 OBSERVE THE WARNINGS AND MAINTENANCE REQUIREMENTS IN THE OWNER’S MANUAL.
Q SAFETY INFORMATION 9 Always signal before turning or changing lanes. Make sure that other motorists can see you. 8 The posture of the operator and passenger is important for proper control. 9 The operator should keep both hands on the handlebar and both feet on the footboard during operation to maintain control of the scooter. 9 The passenger should always hold onto the operator, the seat strap or grab bar, if equipped, with both hands and keep both feet on the passenger footrests.
Q SAFETY INFORMATION 1 2 3 4 5 6 7 8 9 When loading within this weight limit, keep the following in mind: 8 Cargo and accessory weight should be kept as low and close to the scooter as possible. Make sure to distribute the weight as evenly as possible on both sides of the scooter to minimize imbalance or instability. 8 Shifting weights can create a sudden imbalance. Make sure that accessories and cargo are securely attached to the scooter before riding.
Safe-riding points Q SAFETY INFORMATION 9 Take care not to spill any gasoline on the engine or exhaust system when refueling. 9 Never refuel while smoking or in the vicinity of an open flame. 8 Never start the engine or let it run for any length of time in a closed area. The exhaust fumes are poisonous and may cause loss of consciousness and death within a short time. Always operate your scooter in an area that has adequate ventilation.
Q SAFETY INFORMATION 1 2 3 bright colored jacket. 8 Do not carry too much luggage on the scooter. An overloaded scooter is unstable. Use a strong cord to secure any luggage to the carriers. A loose load will affect the stability of the scooter and could divert your attention from the road. (See page 1-1.) 4 5 6 7 8 9 1-5 5YR-F8199-14_ch1.
Labels, location of Q SAFETY INFORMATION EAU10381 Location of important labels Please read the following important labels carefully before operating this vehicle. 1 2 3 1 2 3 4 6 5 5 6 7 4 8 9 1-6 5YR-F8199-14_ch1.
Q SAFETY INFORMATION 1 4 2 5 3 6 1 2 3 4 5 6 7 8 9 1-7 5YR-F8199-14_ch1.
Q SAFETY INFORMATION 1 2 3 4 5 6 7 8 9 1-8 5YR-F8199-14_ch1.
Part locations EAU10400 DESCRIPTION EAU10410 Left view 1 2 2 3 4 1 3 4 5 5 6 6 7 9 8 9 1. 2. 3. 4. 5. 6. 7. 8. 9. 8 7 Front turn signal light (page 6-27) Luggage hook (page 3-9) Helmet holder (page 3-7) Storage compartment (page 3-8) Rear turn signal light (page 6-27) Brake lever free play adjusting nut (page 6-17) Kickstarter (page 3-6) Air filter (page 6-12) Battery (page 6-23) 2-1 5YR-F8199-14_ch2.
DESCRIPTION EAU10420 Right view 1 2 3 4 5 1 6 2 3 4 5 6 7 9 8 7 8 1. 2. 3. 4. 5. 6. 7. 8. 9. Tail/brake light (page 6-27) Carrier (page 3-9) Fuel tank cap (page 3-4) Seat (page 3-7) Front brake master cylinder (page 6-19) Headlight (page 6-25) Spark plug (page 6-8) Centerstand (page 6-21) Muffler 9 2-2 5YR-F8199-14_ch2.
DESCRIPTION EAU10430 Controls and instruments 1 1 2 3 4 2 3 5 4 5 7 8 6 7 8 9 1. 2. 3. 4. 5. 6. 7. 8. Rear brake lever (page 3-4) Left handlebar switches (page 3-3) Speedometer unit (page 3-2) Right handlebar switches (page 3-3) Front brake lever (page 3-4) Throttle grip (page 6-14) Main switch/steering lock (page 3-1) Fuel gauge (page 3-2) 2-3 5YR-F8199-14_ch2.
Main switch/steering lock EAU10444 INSTRUMENT AND CONTROL FUNCTIONS EAU10460 Main switch/steering lock EAU10660 OFF All electrical systems are off. The key can be removed. EAU10680 LOCK The steering is locked, and all electrical systems are off. The key can be removed. To lock the steering To unlock the steering 1 1 2 2 3 ZAUM00** 4 ZAUM00** 1. Turn. 2. Release. 1 The main switch/steering lock controls the ignition and lighting systems, and is used to lock the steering.
Indicator lights Turn signal indicator light High beam indicator light Speedometer unit Fuel gauge INSTRUMENT AND CONTROL FUNCTIONS EAU10980 Indicator lights 1 EAUT1820 Speedometer unit 2 40 1 50 30 60 80 60 40 20 2 60 40 20 100 20 80 0 0 MPH 70 120 10 0 0 60 80 70 120 50 30 100 20 10 1 1 40 2 EAU12150 Fuel gauge 80 MPH 3 4 5 ZAUM00** ZAUM00** 1. High beam indicator light“&” 2.
Handlebar switches Dimmer switch Turn signal switch Horn switch Engine stop switch Start switch INSTRUMENT AND CONTROL FUNCTIONS EAU12347 Handlebar switches EAU12500 Right *” Horn switch “* Press this switch to sound the horn. Left 1 1 EAU12660 #/$ $” Engine stop switch “# Set this switch to “#” before starting the engine. Set this switch to “$” to stop the engine in case of an emergency, such as when the motorcycle overturns or when the throttle cable is stuck.
Brake lever, front Brake lever, rear Fuel tank cap INSTRUMENT AND CONTROL FUNCTIONS EAU12900 Front brake lever EAU12950 Rear brake lever 1 1 1 EAU32483 Fuel tank cap 2 1 2 3 4 5 6 7 ZAUM00** ZAUM00** ZAUM00** 1. Front brake lever 1. Rear brake lever 1. Fuel tank cap lock cover 2. Match marks The front brake lever is located on the right handlebar grip. To apply the front brake, pull this lever toward the handlebar grip.
Fuel INSTRUMENT AND CONTROL FUNCTIONS NOTE: The fuel tank cap cannot be installed unless the key is in the lock. In addition, the key cannot be removed if the cap is not properly installed and locked. EAU13211 Fuel deteriorate painted surfaces or plastic parts. 1 EAU36080 Recommended fuel: UNLEADED GASOLINE ONLY Fuel tank capacity: 4.7 L (1.24 US gal) (1.03 Imp.gal) EWA10130 w ECA11400 cC ZAUM00** 1. Fuel tank filler tube Make sure that there is sufficient fuel in the tank.
Catalytic converter Kickstarter INSTRUMENT AND CONTROL FUNCTIONS 1 2 3 Gasohol There are two types of gasohol: gasohol containing ethanol and that containing methanol. Gasohol containing ethanol can be used if the ethanol content does not exceed 10%. Gasohol containing methanol is not recommended by Yamaha because it can cause damage to the fuel system or vehicle performance problems.
Seat Helmet holder INSTRUMENT AND CONTROL FUNCTIONS EAU13932 Seat To open the seat 1. Place the scooter on the centerstand. 2. Insert the key into the main switch, and then turn it counterclockwise to “OPEN”. 2. Remove the key from the main switch if the scooter will be left unattended. NOTE: Make sure that the seat is properly secured before riding. EAU14300 Helmet holder 1 1 2 3 4 ZAUM00** 1. Helmet holder 5 The helmet holder is located under the seat.
Storage compartment INSTRUMENT AND CONTROL FUNCTIONS 1 To release the helmet from the helmet holder Open the seat, remove the helmet from the helmet holder, and then close the seat. EAU14510 Storage compartment 1 2 3 4 ZAUM00** 1. Storage compartment 5 There is a storage compartment under the seat. (See page 3-7.) 6 EWA10960 w 7 8 Do not exceed the load limit of 5 kg (11 lb) for the storage compartment. 8 Do not exceed the maximum load of 144 kg (317 lb) for the vehicle.
Carrier Luggage hook INSTRUMENT AND CONTROL FUNCTIONS tended with the seat open. EAU15110 Carrier EAUT1070 Luggage hook 1 1 1 2 3 ZAUM00** 4 ZAUM00** 1. Rear carrier 1. Luggage hook EWA10170 w EWAT1030 5 w 8 Do not exceed the load limit of 3 kg (7 lb) for the carrier. 8 Do not exceed the maximum load of 144 kg (317 lb) for the vehicle. 8 Do not exceed the load limit of 3 kg (7 lb) for the luggage hook. 8 Do not exceed the maximum load of 144 kg (317 lb) for the vehicle.
Sidestand Ignition circuit cut-off system INSTRUMENT AND CONTROL FUNCTIONS EAU15301 Sidestand 1 2 3 4 The sidestand is located on the left side of the frame. Raise the sidestand or lower it with your foot while holding the motorcycle upright. NOTE: The built-in sidestand switch is part of the ignition circuit cut-off system, which cuts the ignition in certain situations. (See further down for an explanation of the ignition circuit cut-off system.
INSTRUMENT AND CONTROL FUNCTIONS With the engine turned off: 1. Move the sidestand down. 2. Make sure that the engine stop switch is turned on. 3. Turn the key on. 4. Keep the front or rear brake applied. 5. Push the start switch. Does the engine start? NO NOTE: This check is most reliable if performed with a warmedup engine. 1 2 The sidestand switch may be defective. The scooter should not be ridden until checked by a Yamaha dealer. YES With the engine still off: 6. Move the sidestand up. 7.
EAU15580 PRE-OPERATION CHECKS EAU15593 1 2 The condition of a vehicle is the owner’s responsibility. Vital components can start to deteriorate quickly and unexpectedly, even if the vehicle remains unused (for example, as a result of exposure to the elements). Any damage, fluid leakage or loss of tire air pressure could have serious consequences. Therefore, it is very important, in addition to a thorough visual inspection, to check the following points before each ride.
Pre-operation check list PRE-OPERATION CHECKS EAU15605 Pre-operation check list ITEM CHECKS PAGE Fuel • Check fuel level in fuel tank. • Refuel if necessary. • Check fuel line for leakage. 3-5 Engine oil • Check oil level in engine. • If necessary, add recommended oil to specified level. • Check vehicle for oil leakage. 6-9 Final transmission oil • Check vehicle for oil leakage. 6-11 Front brake • • • • • • • Check operation. If soft or spongy, have Yamaha dealer bleed hydraulic system.
PRE-OPERATION CHECKS ITEM CHECKS • Make sure that operation is smooth. • Lubricate pivot if necessary. Centerstand, sidestand 1 2 3 PAGE 6-21 Chassis fasteners • Make sure that all nuts, bolts and screws are properly tightened. • Tighten if necessary. - Instruments, lights, signals and switches • Check operation. • Correct if necessary. - Engine stop switch • Check operation. 3-3 Sidestand switch • Check operation of ignition circuit cut-off system.
Starting a cold engine EAU15941 OPERATION AND IMPORTANT RIDING POINTS EAU15980 EWA10870 w EAU16592 Starting a cold engine ECA10250 8 Become thoroughly familiar with all operating controls and their functions before riding. Consult a Yamaha dealer regarding any control or function that you do not thoroughly understand. 8 Never start the engine or operate it in a closed area for any length of time.
Starting off Acceleration and deceleration Braking OPERATION AND IMPORTANT RIDING POINTS EAU16770 Starting off 1 EAU16780 Acceleration and deceleration NOTE: Before starting off, allow the engine to warm up. 50 60 80 100 b 3 20 4 70 120 10 EWA10300 0 0 1. While pulling the rear brake lever with your left hand and holding the carrier with your right hand, push the scooter off the centerstand.
Engine break-in Parking OPERATION AND IMPORTANT RIDING POINTS EAU16830 Engine break-in There is never a more important period in the life of your engine than the period between 0 and 1000 km (600 mi). For this reason, you should read the following material carefully. the engine oil must be changed, and the oil filter element and the oil strainer cleaned. EAU17212 Parking When parking, stop the engine, and then remove the key from the main switch.
OPERATION AND IMPORTANT RIDING POINTS 1 2 park in a place where pedestrians or children are not likely to touch them. 8 Do not park on a slope or on soft ground, otherwise the vehicle may overturn. ECA10380 3 cC 4 Never park in an area where there are fire hazards such as grass or other flammable materials. 5 6 7 8 9 5-4 5YR-F8199-14_ch5.
Maintenance, periodic Tool kit EAU17224 PERIODIC MAINTENANCE AND MINOR REPAIR EAU17231 Safety is an obligation of the owner. Periodic inspection, adjustment and lubrication will keep your vehicle in the safest and most efficient condition possible. The most important points of motorcycle inspection, adjustment, and lubrication are explained on the following pages.
PERIODIC MAINTENANCE AND MINOR REPAIR EWA10340 w 1 2 Modifications not approved by Yamaha may cause loss of performance, excessive emissions, and render the vehicle unsafe for use. Consult a Yamaha dealer before attempting any changes. 3 4 5 6 7 8 9 6-2 5YR-F8199-14_ch6.
Maintenance, emission control system PERIODIC MAINTENANCE AND MINOR REPAIR EAU17560 Periodic maintenance chart for the emission control system INITIAL NO. ITEM ROUTINE 600 mi (1,000 km) or 1 month ODOMETER READING 2,000 mi (4,000 km) or 6 months 4,000 mi 6,000 mi 8,000 mi 10,000 mi (7,000 km) (10,000 km) (13,000 km) (16,000 km) or or or or 12 18 24 30 months months months months Fuel line • Check fuel and vacuum hoses for cracks or damage. • Replace if necessary.
Maintenance and lubrication, periodic PERIODIC MAINTENANCE AND MINOR REPAIR EAU32125 General maintenance and lubrication chart INITIAL 1 NO. ITEM ROUTINE 2 1 3 2 4 5 6 7 * Air filter element V-belt case air filter element 600 mi (1,000 km) or 1 month ODOMETER READING 2,000 mi (4,000 km) or 6 months 10,000 mi 8,000 mi 6,000 mi 4,000 mi (7,000 km) (10,000 km) (13,000 km) (16,000 km) or or or or 30 24 18 12 months months months months • Replace.
PERIODIC MAINTENANCE AND MINOR REPAIR INITIAL NO. 9 ITEM ROUTINE * Chassis fasteners 600 mi (1,000 km) or 1 month ODOMETER READING 2,000 mi (4,000 km) or 6 months 10,000 mi 8,000 mi 6,000 mi 4,000 mi (7,000 km) (10,000 km) (13,000 km) (16,000 km) or or or or 30 24 18 12 months months months months • Check all chassis fitting and fasteners. • Correct if necessary. 2 3 10 Front brake lever pivot shaft • Apply silicone grease lightly.
PERIODIC MAINTENANCE AND MINOR REPAIR INITIAL NO. ITEM ROUTINE 1 2 20 3 Final transmission oil 19 * V-belt * 22 * • Check operation and free play. • Adjust the throttle cable free play if Throttle grip housing necessary. and cable • Lubricate the throttle grip housing and cable. 23 * switches 21 5 7 Lights, signals and ODOMETER READING 2,000 mi (4,000 km) or 6 months • Check operation. • Adjust headlight beam.
PERIODIC MAINTENANCE AND MINOR REPAIR EAU17620 NOTE: 8 The air filter needs more frequent service if you are riding in unusually wet or dusty areas. Hydraulic brake system 9 When disassembling the master cylinder or caliper cylinder, always replace the brake fluid. Check the brake fluid level regularly and fill as required. 9 Replace the oil seals on the inner parts of the master cylinder and caliper cylinder every two years. 9 Replace the brake hoses every four years or if cracked or damaged.
Panels, removing and installing Spark plug, checking PERIODIC MAINTENANCE AND MINOR REPAIR EAU18771 1 2 EAUT1831 2 Removing and installing panels Checking the spark plug The spark plug is an important engine component, which is easy to check. Since heat and deposits will cause any spark plug to slowly erode, the spark plug should be removed and checked in accordance with the periodic maintenance and lubrication chart.
Engine oil and oil strainer PERIODIC MAINTENANCE AND MINOR REPAIR in the owner’s tool kit. To check the spark plug 1. Check that the porcelain insulator around the center electrode of the spark plug is a medium-to-light tan (the ideal color when the vehicle is ridden normally). NOTE: If the spark plug shows a distinctly different color, the engine could be operating improperly. Do not attempt to diagnose such problems yourself. Instead, have a Yamaha dealer check the vehicle. 2.
PERIODIC MAINTENANCE AND MINOR REPAIR 5. Clean the oil strainer with solvent, and then check it for damage and replace it if necessary. 1 2 1 3 2 4 1 3 3 2 1 ZAUM00** ZAUM00** 4 5 6 7 8 9 1. Engine oil filler cap 1 1. Engine oil level check window 2. Maximum level mark 3. Minimum level mark ZAUM00** 1. 2. 3. 4. 4. If the engine oil is below the minimum level mark, add sufficient oil of the recommended type to raise it to the correct level.
Final transmission oil PERIODIC MAINTENANCE AND MINOR REPAIR Tightening torque: Engine oil drain bolt A: 23 Nm (2.3 m•kgf, 16.6 ft•lbf) Engine oil drain bolt B: 32 Nm (3.2 m•kgf, 23.1 ft•lbf) NOTE: Make sure that the O-ring is properly seated. 8. Add the specified amount of the recommended engine oil, and then install and tighten the engine oil filler cap. 8 Be sure no foreign material enters the crankcase. 9.
Air filter and V-belt case air filter elements PERIODIC MAINTENANCE AND MINOR REPAIR 1 1 EAUT1301 Tightening torque: Final transmission oil drain bolt: 23 Nm (2.3 m•kgf, 16.6 ft•lbf) Air filter and V-belt case air filter elements 6. Add the specified amount of the recommended final transmission oil, and then install and tighten the oil filler cap. 2 3 ZAUM00** 4 1. Final transmission oil filler cap 5 Recommended final transmission oil: See page 8-1. Oil quantity: 0.13 L (0.14 US qt) (0.
PERIODIC MAINTENANCE AND MINOR REPAIR then blow the dirt out with compressed air as shown. ECA10480 cC 8 Make sure that the air filter element is properly seated in the air filter case. 8 The engine should never be operated without the air filter element installed, otherwise the piston(s) and/or cylinder(s) may become excessively worn. 1 6. Install the air filter case cover by installing the screw. ZAUM00** 1. Air filter element ZAUM00** 4.
Carburetor Throttle cable free play, checking PERIODIC MAINTENANCE AND MINOR REPAIR 9. Install the kickstarter lever by installing the bolt, then tightening the bolt to the specified torque. 1 2 Tightening torque: Kickstarter bolt: 23 Nm (2.3 m•kgf, 16.6ft•lbf) 3 EAU21251 Carburetor The carburetor is an important part of the engine and its emission control system, which requires very sophisticated adjustment.
Tires PERIODIC MAINTENANCE AND MINOR REPAIR EAUT1701 Tires To maximize the performance, durability, and safe operation of your scooter, note the following points regarding the specified tires. Tire air pressure The tire air pressure should be checked and, if necessary, adjusted before each ride. EWA10500 w 8 The tire air pressure must be checked and adjusted on cold tires (i.e., when the temperature of the tires equals the ambient temperature).
Wheels PERIODIC MAINTENANCE AND MINOR REPAIR 1 2 3 4 5 The tires must be checked before each ride. If a tire tread shows crosswise lines (minimum tread depth), if the tire has a nail or glass fragments in it, or if the sidewall is cracked, have a Yamaha dealer replace the tire immediately. Minimum tire tread depth (front and rear): 0.8 mm (0.03 in) Cast wheels EWA10580 NOTE: The tire tread depth limits may differ from country to country. Always comply with the local regulations.
Front brake lever free play, checking Rear brake lever free play, adjusting PERIODIC MAINTENANCE AND MINOR REPAIR EAUT1220 EAU22170 Checking the front brake lever free play Adjusting the rear brake lever free play 1 1 1 2 1 (b) ZAUM00** (a) 3 1. Adjusting nut 4 EWA10650 ZAUM0107 w ZAUM0108 1. Front brake lever free play 1. Rear brake lever free play The brake lever free play should measure 2.0~5.0 mm (0.08~0.20 in) as shown.
Brake pads and shoes, checking PERIODIC MAINTENANCE AND MINOR REPAIR EAU22380 Checking the front brake pads and rear brake shoes 2 The front brake pads and the rear brake shoes must be checked for wear at the intervals specified in the periodic maintenance and lubrication chart. 3 Front brake pads 1 brake. If a brake pad has worn to the point that the wear indicator almost touches the brake disc, have a Yamaha dealer replace the brake pads as a set.
Brake fluid level, checking PERIODIC MAINTENANCE AND MINOR REPAIR EAU32344 Checking the brake fluid level 1 LOWER MIN ZAUM00** Observe these precautions: 8 When checking the fluid level, make sure that the top of the master cylinder is level by turning the handlebars. 8 Use only the recommended quality brake fluid, otherwise the rubber seals may deteriorate, causing leakage and poor braking performance. brake fluid level goes down suddenly, have a Yamaha dealer check the cause.
Brake fluid, changing Cables, checking and lubricating Throttle grip and cable, checking and lubricating PERIODIC MAINTENANCE AND MINOR REPAIR EAU22720 Changing the brake fluid 1 2 3 4 Have a Yamaha dealer change the brake fluid at the intervals specified in the NOTE after the periodic maintenance and lubrication chart.
Brake levers, lubricating Centerstand and sidestand, checking and lubricating PERIODIC MAINTENANCE AND MINOR REPAIR EAU43640 EAU23211 Lubricating the front and rear brake levers Checking and lubricating the centerstand and sidestand Recommended lubricant: Lithium-soap-based grease (allpurpose grease) 1 2 3 4 ZAUM00** ZAUM00** 5 The pivoting points of the front and rear brake levers must be lubricated at the intervals specified in the periodic maintenance and lubrication chart.
Front fork, checking Steering, checking PERIODIC MAINTENANCE AND MINOR REPAIR EAU23271 1 EAU23280 Checking the front fork Checking the steering The condition and operation of the front fork must be checked as follows at the intervals specified in the periodic maintenance and lubrication chart. Worn or loose steering bearings may cause danger. Therefore, the operation of the steering must be checked as follows at the intervals specified in the periodic maintenance and lubrication chart. 1.
Wheel bearings, checking Battery PERIODIC MAINTENANCE AND MINOR REPAIR EAU23290 Checking the wheel bearings EAUT1230 Battery The front and rear wheel bearings must be checked at the intervals specified in the periodic maintenance and lubrication chart. If there is play in the wheel hub or if the wheel does not turn smoothly, have a Yamaha dealer check the wheel bearings. ZAUM00** 1 2 3 1 4 ZAUM00** 1.
PERIODIC MAINTENANCE AND MINOR REPAIR 1 2 3 4 5 6 7 8 9 acid, which causes severe burns. Avoid any contact with skin, eyes or clothing and always shield your eyes when working near batteries. In case of contact, administer the following FIRST AID. 9 EXTERNAL: Flush with plenty of water. 9 INTERNAL: Drink large quantities of water or milk and immediately call a physician. 9 EYES: Flush with water for 15 minutes and seek prompt medical attention. 8 Batteries produce explosive hydrogen gas.
Fuse, replacing Headlight bulb, replacing PERIODIC MAINTENANCE AND MINOR REPAIR EAUT1240 Replacing the fuse 1 ECA10640 EAU23780 cC Replacing the headlight bulb Do not use a fuse of a higher amperage rating than recommended to avoid causing extensive damage to the electrical system and possibly a fire. This model is equipped with a quartz bulb headlight. If the headlight bulb burns out, replace it as follows. 1. Remove the headlight unit by removing the screws. 1.
PERIODIC MAINTENANCE AND MINOR REPAIR Thoroughly clean off any dirt and fingerprints on the headlight bulb using a cloth moistened with alcohol or thinner. 1 1 1 2 2 3 4 5 6 ZAUM00** ZAUM00** 1. Headlight bulb holder 1. Headlight coupler 2. Bulb cover EWA10790 5. Install the headlight bulb cover, and then connect the coupler. 6. Install the headlight unit by installing the screws. 7. Have a Yamaha dealer adjust the headlight beam if necessary. w 3.
Tail/brake light bulb, replacing Turn signal light bulb, replacing PERIODIC MAINTENANCE AND MINOR REPAIR EAU24131 Replacing the tail/brake light bulb wise the lens may break. EAU24202 Replacing a turn signal light bulb 1. Remove the turn signal light lens by removing the screw. 1 1 2 2 2 3 1 4 ZAUM00** 5 1. Tail/brake light lens 2. Bulb ZAUM00** 1. Turn signal light lens 2. Bulb 1. Remove the tail/brake light lens by removing the screws. 2.
Troubleshooting PERIODIC MAINTENANCE AND MINOR REPAIR EAU25860 Troubleshooting 2 1 2 1 3 ZAUM00** 4 5 6 7 8 9 1. Turn signal light lens 2. Bulb 2. Remove the defective bulb by pushing it in and turning it counterclockwise. 3. Insert a new bulb into the socket, push it in, and then turn it clockwise until it stops. 4. Install the lens by installing the screw. Although Yamaha scooters receive a thorough inspection before shipment from the factory, trouble may occur during operation.
Troubleshooting chart PERIODIC MAINTENANCE AND MINOR REPAIR EAU25901 Troubleshooting chart EWA10840 w Keep away open flames and do not smoke while checking or working on the fuel system. 1 2 1. Fuel 3 There is enough fuel. Check the compression. There is no fuel. Supply fuel. Check the fuel level in the fuel tank. The engine does not start. Check the compression. 4 5 2. Compression There is compression. Check the ignition. There is no compression. Have a Yamaha dealer check the vehicle.
Care EAU25991 SCOOTER CARE AND STORAGE EAU26091 axles. Always rinse the dirt and degreaser off with water. Care 1 2 3 4 5 6 7 8 9 While the open design of a scooter reveals the attractiveness of the technology, it also makes it more vulnerable. Rust and corrosion can develop even if high-quality components are used. A rusty exhaust pipe may go unnoticed on a car, however, it detracts from the overall appearance of a scooter.
SCOOTER CARE AND STORAGE After normal use Remove dirt with warm water, a mild detergent, and a soft, clean sponge, and then rinse thoroughly with clean water. Use a toothbrush or bottlebrush for hard-to-reach areas. Stubborn dirt and insects will come off more easily if the area is covered with a wet cloth for a few minutes before cleaning.
Storage SCOOTER CARE AND STORAGE EAU26300 away the paint. 1 Storage NOTE: Consult a Yamaha dealer for advice on what products to use. Short-term Always store your scooter in a cool, dry place and, if necessary, protect it against dust with a porous cover. ECA10820 2 cC ● 3 4 ● 5 6 Storing the scooter in a poorly ventilated room or covering it with a tarp, while it is still wet, will allow water and humidity to seep in and cause rust.
SCOOTER CARE AND STORAGE spark plug electrodes while turning the engine over. NOTE: Make any necessary repairs before storing the scooter. 5. Lubricate all control cables and the pivoting points of all levers and pedals as well as of the sidestand/ centerstand. 6. Check and, if necessary, correct the tire air pressure, and then lift the scooter so that both of its wheels are off the ground.
Specifications EAU26320 SPECIFICATIONS EAU2633K Dimensions 1 2 3 4 Weight 6 Engine 7 8 9 Type YAMALUBE 4, SAE10W30 or SAE20W40 Overall length 1755 mm (69.1 in) Overall width 699 mm (27.5 in) Overall height 1063 mm (41.9 in) Seat height 759 mm (29.9 in) Wheelbase 1230 mm (48.4 in) Ground clearance 95 mm (3.74 in) Minimum turning radius 1800 mm (70.9 in) 5 Engine oil 0 10 30 50 70 90 Type x quantity BS26 x 1 Spark plug (s) Manufacturer/model NGK/CR7E Spark plug gap 0.7-0.8 mm (0.028-0.
SPECIFICATIONS Manufacturer/model CHENG SHIN/C-922L Front brake Type Single disc brake Operation Right hand operation Recommended fluid DOT 3 or 4 Rear tire Type Tubeless Size 3.50-10 51J Manufacturer/model CHENG SHIN/C-6007 Rear brake Type Drum brake Operation Left hand operation Loading Maximum load 144 kg (317 lb) Tire air pressure (measured on cold tires) Loading condition 0-90 kg (0-198 lb) Front 150 kPa (22 psi) (1.50 kgf/cm2) Rear 200 kPa (29 psi) (2.
Identification numbers Key identification number Vehicle identification number EAU26342 CONSUMER INFORMATION EAU26351 Identification numbers 1 2 3 4 Record the key identification number, vehicle identification number and model label information in the spaces provided below for assistance when ordering spare parts from a Yamaha dealer or for reference in case the vehicle is stolen.
Model label CONSUMER INFORMATION EAU26460 Model label 1 1 2 3 4 ZAUM00** 1. Model label 5 The model label is affixed to the location shown. Record the information on this label in the space provided. This information will be needed when ordering spare parts from a Yamaha dealer. 6 7 8 9 9-2 5YR-F8199-14_ch9ind.
Safety defects, reporting CONSUMER INFORMATION EAU26551 Reporting safety defects 1 2 3 4 If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying Yamaha Motor Corporation, U.S.A.
Noise regulation CONSUMER INFORMATION EAU26560 Motorcycle noise regulation TAMPERING WITH NOISE CONTROL SYSTEM PROHIBITED: Federal law prohibits the following acts or the causing thereof: (1) The removal or rendering inoperative by any person other than for purposes of maintenance, repair, or replacement of any device or element of design incorporated into any new vehicle for the purpose of noise control prior to its sale or delivery to the ultimate purchaser or while it is in use or (2) the use of t
Maintenance record CONSUMER INFORMATION EAU26600 Maintenance record 1 2 3 Copies of work orders and/or receipts for parts purchased and installed on your motorcycle will be required to document that maintenance has been completed in accordance with the emissions warranty. The chart below is printed only as a reminder that maintenance work is required. It is not acceptable proof of maintenance work.
CONSUMER INFORMATION Maintenance interval 16000 mi (25000 km) or 48 months Date of service Servicing dealer name and address Mileage Remarks 1 18000 mi (28000 km) or 54 months 2 20000 mi (31000 km) or 60 months 3 4 5 6 7 8 9 9-6 5YR-F8199-14_ch9ind.
Warranty, limited CONSUMER INFORMATION EAU26681 YAMAHA MOTOR CORPORATION, U.S.A. RIVA LIMITED WARRANTY 1 2 3 4 5 6 7 8 9 9-7 5YR-F8199-14_ch9ind.
CONSUMER INFORMATION 1 2 3 4 5 6 7 8 9 9-8 5YR-F8199-14_ch9ind.
Warranty, extended CONSUMER INFORMATION EAU26750 YAMAHA EXTENDED SERVICE (Y.E.S.) 1 2 3 4 5 6 7 8 9 Keep your Yamaha protected even after your warranty expires with genuine Yamaha Extended Service (Y.E.S.). In addition, Travel and Recreation Interruption Protection (TRIP) is included at no extra cost.
CONSUMER INFORMATION We urge you to act now. You’ll get the excellent benefits of TRIP coverage right away, and you’ll rest easy knowing you’ll have strong factory-backed protection even after your Yamaha Limited Warranty expires. 1 A special note: If visiting your dealer isn’t convenient, contact Yamaha with your Primary ID number (your frame number). We’ll be happy to help you get the Y.E.S. coverage you need. 2 Yamaha Service Marketing P.O.
INDEX Fuse, replacing ...................................... 6-25 A Acceleration and deceleration ................. 5-2 Air filter and V-belt case air filter elements .............................................. 6-12 I Identification numbers .............................. 9-1 Ignition circuit cut-off system ................. 3-10 Indicator lights .......................................... 3-2 K Key identification number ......................... 9-1 Kickstarter .........................................
INDEX 5YR-F8199-14_ch9ind.
1 2 3 4 5 6 7 8 9 5YR-F8199-14_ch9ind.
1 2 3 4 5 6 7 8 9 5YR-F8199-14_ch9ind.
1 2 3 4 5 6 7 8 9 5YR-F8199-14_ch9ind.
1 2 3 4 5 6 7 8 9 5YR-F8199-14_ch9ind.
YAMAHA MOTOR TAIWAN CO., LTD PRINTED IN TAIWAN ×1! 2007.07-0.8× (E) 5YR-F8199-14_ch0cv.
