Owner`s manual

Getting Started

●

Voice Selection

Using the Voice Directory

The VL1-m also features a voice directory display that can be more convenient than

the normal voice display in some situations. To switch to the voice directory display,

press the • button — located directly below “Dir” on the display. The directory display

shows all 16 voices in the current bank. Voices can be selected using either the data dial

or = and - buttons as described above — the cursor will move to the selected

voice. You can also use the cursor keys to move the cursor to the next voice to be

selected (the voice is not actually selected in this case — the cursor will flash), then press

the [ key to actually select the specified voice. This method lets you switch directly

to the specified voice without having to go through all others in between

To return to the normal voice display press the ] or P button.

The Sound Function

You can check the sound of the current voice in the PLAY mode directly from the

VL1-m panel: press the

ENTER/SOUND

key. The pitch played is C4.