Owner's Manual

15
Voice ListsMIDI Data Format
8 00110000 30 ascii”0"
9 00110001 31 ascii”1"
10 00110001 31 ascii”1"
11 00110111 37 ascii”7"
12 0aaaaaaa a = data type
13 0aaaaaaa a = data type
56,43(ascii”V”,”C”) : Voice
53,59(ascii”S”,”Y”) : System
50,52(ascii”P”,”R”) : Program Change Table (VL1-m
only)
14 0ttttttt t = memory type
0 : Memory, 7F : Edit Buffer
15 0uuuuuuu u = memory number
Ignored when memory type = 7F
When memory type = 0, indicates the voice number.
0 ~ 7F : A01(001) ~ H16(128) VL1,1-m
0 ~ 3F : A01(001) ~ D16(064) VL7
16 00000000 00
Ø
29 00000000 00
30 11110111 F7 EOX
Counts 14 and 15 ignored when receiving “SY” and “PR” data.
On reception, counts 16 ~ 29 are ignored as they are sent as 0’s.
4.4 DX1 Master Tuning Compatibility
The System Master Tuning Parameter Change is transmitted / received in
DX1 compatible format.
Count Value $ Description
0 11110000 F0
1 01000011 43
2 0001nnnn n = device number
3 00000100 04
4 01000000 40
5 0vvvvvvv v = parameter value
-64 ~ +63 (o/b)
6 11110111 F7 EOX
(o/b): offset binary (The 2’s complement sign bit reversed.)
4.5 SY77/99 Micro Tuning Compatibility
The Bulk Dump, Bulk Dump Request, and Parameter Change messages for
Micro Tuning are in SY77/99 compatible format.
4.5.1 Bulk Dump
Transmit / receive
Count Value $ Description
0 11110000 F0
1 01000011 43
2 0000nnnn n = device number
3 01111010 7A
4 0bbbbbbb b = MSB of byte count
5 0bbbbbbb b = LSB of byte count
Byte count is from count 6 to the beginning of check
sum.
6 01001100 4C ascii”L”
7 01001101 4D ascii”M”
8 00100000 20 ascii” “
9 00100000 20 ascii” “
10 00111000 38 ascii”8"
11 00110001 31 ascii”1"
12 00110000 30 ascii”0"
13 00110001 31 ascii”1"
14 01001101 4D ascii”M”
15 01010100 54 ascii”T”
16 00000000 00
Ø
30 00000000 00
31 0uuuuuuu u = memory number
0,1,2 ~ 55 : I-1,I-2,P-1 ~ P-84
32 0vvvvvvv v = data
Ø
297 0vvvvvvv v
298 0sssssss s = check sum
299 11110111 F7 EOX
On reception, memory number 2~:P-1~ is received as 1:I-2.
Data is
nos.32 ~ 297 Separate table 5.4 Micro Tuning Parameters,
nos.0 ~ 265
4.5.2 Parameter Change
Performed only during receive.
Count Value $ Description
0 11110000 F0
1 01000011 43
2 0001nnnn n = device number
3 00110100 34
4 00001011 0B
5 0000000u u = memory number
0 : I-1 , 1 : I-2
6 000000pp p = MSB of parameter offset
7 0ppppppp p = LSB of parameter offset
8 0vvvvvvv v = parameter value
9 0vvvvvvv v = parameter value
10 11110111 F7 EOX
Refer to the separate table 5.4 Micro Tuning Parameters of the values of p
and v.
4.5.3 Bulk Dump Request
Performed only during receive.
Count Value $ Description
0 11110000 F0
1 01000011 43
2 0010nnnn n = device number
3 01111010 7A
4 01001100 4C ascii”L”
5 01001101 4D ascii”M”
6 00100000 20 ascii” “
7 00100000 20 ascii” “
8 00111000 38 ascii”8"
9 00110001 31 ascii”1"
10 00110000 30 ascii”0"
11 00110001 31 ascii”1"
12 01001101 4D ascii”M”
13 01010100 54 ascii”T”
14 00000000 00
Ø
28 00000000 00
29 0uuuuuuu u = memory number
0,1,2 ~ 55 : I-1,I-2,P-1 ~ P-84
30 11110111 F7 EOX