Owner's Manual

124
Feature Reference
●
Edit Mode
● RSN
≤ off, on.
Turns the Resonator stage off or on. When off (and the Impulse Expander, above, is
on) the display will appear as shown below. Only parameters which appear in the dia-
gram are available for editing.
● Dry Level
≤ 0 … 127.
Sets the level of the dry signal (i.e. the direct signal which does not pass through
either the Impulse Expander or the Resonator.
● IE Wet Level
≤ 0 … 127.
Sets the “wet” output level from the Impulse Expander. The higher the value the
higher the Impulse Expander level.
● IE Level Bal
≤ -64 … 63.
Adjusts the left-right balance of the wet Impulse Expander signal returned to the
stereo signal path. Positive values route more signal to the right channel while negative
values route more signal to the left channel.
● RSN Inp Gain
≤ 0 … 127.
Sets the level of the Impulse Expander output signal received at the input of the
Resonator stage. The higher the value the higher the input level.
● RSN Wet Level
≤ 0 … 127.
Sets the “wet” output level from the Resonator. The higher the value the higher the
Resonator level.
● RSN Level Bal
≤ -64 … 63.
Adjusts the left-right balance of the wet Resonator signal returned to the stereo
signal path. Positive values route more signal to the right channel while negative values
route more signal to the left channel.