Owner's Manual

145
Feature Reference
●
Edit Mode
● Rate: Decay
≤ 0 … 127.
Determines the rate at which the envelope level goes from maximum level to the
sustain level set by the “Level: Sustain” parameter. The higher the value the faster
the decay.
● Rate: Release
≤ 0 … 127.
Determines the rate at which the envelope level goes from the sustain level to “0”
when the key is released. The higher the value the faster the release.
● Level: Attack1
≤ 0 … 127.
Sets the envelope level reached by the first portion of the attack, as determined by
the “Rate: Attack1” parameter. The higher the value the higher the level. When set
to “127” the attack 1 level becomes the same as the maximum level, therefore the
second portion of the attack (“Rate: Attack2” parameter) will not be produced.
● Level: Sustain
≤ 0 … 127.
Sets the envelope sustain level. The higher the value the higher the level. When set
to “127” the sustain level becomes the same as the maximum level, therefore the decay
portion of the envelope (“Rate: Decay” parameter) will not be produced.
Element Envelope