Owner's Manual
153
Feature Reference
●
Utility Mode
System
1: TG Setting
●
Master Tuning
≤ -64 … 63.
Fine tunes the overall pitch of the VL1-m in approximately 1.17-cent steps (a “cent”
is 1/100th of a semitone). The maximum minus setting of “-64” produces a downward
pitch shift of almost three-quarters of a semitone, and the maximum plus setting of “63”
produces an upward pitch shift of the same amount. A setting of “0” produces no pitch
change.
●
Reverb
≤ off, on.
Turns the VL1-m’s internal reverb system off or on. This can be handy if you want
to use an external signal processor for rverberation.
●
Output
≤ Monaural, Stereo.
Determines whether the VL1-m output is delivered in mono or stereo. When the
“Monaural” setting is selected the same signal is output via the both the L and R OUT-
PUT jacks. Also, in the mono mode all parameters relating to panning or positioning in
the stereo sound field have no effect.
●
WX Lip
≤ Normal, Expand.
This parameter can be set
to “Expand” when using a
WX11 or WX7 Wind Controller
in the tight-lip mode to expand
the normally limited lip pitch
bend range of these controllers
to the full range available on the
VL1-m.
Set to “Normal” when
using a WX11 or WX7 in the
loose-lip mode, or when using a
keyboard or other non-wind
controller.
tight-lip
63
0
-63
-16
31
Expand
loose-lip
63
0
-63
Normal