Owner's Manual

Feature Reference

●

Edit Mode

Initial Edit Page

●

Voice Name

≤ A name of up to 10 characters.

To enter a new voice name position the cursor at the “Voice Name” parameter

and press [ or • (“Name” — “Name” only appears above the • button when

the cursor is positioned at the “Voice Name” parameter). The VOICE NAME display

will appear.

• Use the cursor , and . buttons to move the cursor to the character in the

voice name at the top of the display that you want to change.

• Use the = and - buttons or data dial to select a new character by

moving through the character list row by row.

• Press the ™ button (“Spc”) to enter a space at the current cursor position.

• Press the £ button (“Clr”) to clear the entire voice name.

• Press ] or [ when the voice name is complete.

●

E1 Name, E2 Name

≤ A name of up to 10 characters.

These parameters allow independent names to be entered for the E1 and E2 ele-

ments of the current voice (only E1 is available in a single-element voice). To enter a

new element name position the cursor at the “E1 Name” or “E2 Name” parameter and

press [ or • (“Name”). The ELEMENT NAME display will appear. Procedure is

the same as for the Voice Name parameter, above, except for the function of the ¢

button, below.

• Press the ¢ button (“Auto”) to copy the voice name to the element name

(suffixes “_A” and “_B” will be appended to the E1 and E2 names respec-

tively).

●

Key Mode

≤ Mono, Poly, Unison.

In conjunction with the Voice Mode parameter, below, the Key Mode parameter

determines how the VL1-m’s two elements are used to produce sound.

Mono Only a single note can be played at a time.

Poly Two different notes may be played simultaneously.

Unison Playing a single key produces two notes in unison.