Owner's Manual

Feature Reference

●

Edit Mode

2: Controller

●

Breath Attack Time

≤ 5.00msec … 1.24 sec.

Determines how quickly the VL1-m responds to changes in breath pressure applied

to the breath controller. A setting of “5.00msec” produces the fastest response; “1.24

sec” produces the slowest response. This parameter should be used with the “Breath

Attack Gain” parameter, below, to determine overall breath controller response.

●

Breath Attack Gain

≤ 0 … 127.

Determines the amount of audible change produced by a changes in breath pressure

applied to the breath controller. A setting of “0” results in no change; “127” produces

maximum change. “127” is the normal setting for this parameter.

●

Touch EG Time

≤ 5.00msec … 1.24 sec.

Sets the response time of the VL1-m Touch Envelope Generator. The Touch Enve-

lope Generator controls the transition from the initial key velocity to aftertouch pressure

when a key is played. A setting of “5.00msec” produces the fastest response; “1.24

sec” produces the slowest response.

●

Polyphony Ctrl

≤ off, Modulation Wheel … 119.

The VL1-m allows any physical MIDI controller to be used to switch between the

mono and poly key modes while playing. This parameter assigns the desired controller to

the key-mode switching function.

The key-mode switching function is off. This setting automatically

selected when Key Mode set to Mono or Unison.

The selected controller will switch between the Mono and Poly key

modes.

off

Modulation

Wheel … 119.

• The key-mode switching function can only be activated (i.e. a controller

assigned) when the Key Mode parameter is set to “Poly”.