Owner's Manual
45
Feature Reference
●
Edit Mode
Common Effect
1: Setting
●
Feedback Delay/Reverb Mode
≤ Serial, Parallel.
Determines whether the Feedback Delay and Reverb effect stages are connected in
series (Serial) or in parallel, as shown in the illustration.
Feedback
Delay
Modulation
Reverb
Serial Mode
From
Element
To
Output
Parallel Mode
Feedback
Delay
From
Element
To
Output
Reverb
Modulation
●
Effect Control — Destination Effect
≤ off, Flanger Freq., Pitch Change Wet/Dry, Distortion Presence, FB Delay Send Level,
Reverb Send Level.
This and the following parameter make it possible to control certain effect param-
eters in real time via any physical MIDI controller. Use this parameter to select the effect
parameter you want to control (only settings corresponding to the currently selected
effects will be available). If the currently selected effect stage is turned off, “isn’t
used” will appear on the display and selection will not be possible.
●
Effect Control — Controller
≤ off, Modulation Wheel … Velocity.
Selects the controller which will be used to control the parameter selected via the
“Destination Effect” parameter. All MIDI control numbers and keyboard veloc-
ity are available. Be sure to turn this parameter “off” if you don’t require realtime effect
control.