Owner's Manual

Feature Reference

●

Edit Mode

• Use the ¡ (“>”) and ™ (“<”) buttons to switch between the two pages

of effect parameters.

●

Element on/off — E1: & E2:

≤ off, on.

In this parameter the cursor can be positioned at “E1:” or “E2:” to individually turn

the flanger effect on or off for elements 1 and 2, respectively. When “on” the output of

the corresponding element is fed to the input of the modulation stage, and when “off”

the modulation stage is bypassed. The “E2:” parameter will not appear when editing a

single-element voice.

●

Wave

≤ Triangle, Sine, Random.

Selects the waveform which will be used to modulate the flanger effect.

Flanger

Common Effect

●

Freq.

≤ 0.057 … 40.0 Hz when Triangle or Sine Wave selected,

≤ 0.229 … 160.0 Hz when Random Wave selected.

Sets the speed of modulation and therefore the rate of flanger effect variation.

●

Depth

≤ 0 … 100 %.

Sets the depth of modulation. Higher values produce deeper modulation and there-

fore a more pronounced flanger effect.

Triangle

Sine

Random