Owner's Manual

Feature Reference

●

Edit Mode

• If this parameter is set to “0”, no throat formant effect can be applied via a

controller.

●

Intens

≤ -127 … 127.

Sets the intensity of the throat formant effect. Higher values in both the positive and

negative ranges increase the intensity of the throat formant effect.

• If this parameter is set to “0”, no throat formant effect can be applied via a

controller.

●

HPF Cutoff Frq

≤ 31.1 Hz … 21.6 kHz.

Sets the cutoff frequency of the throat formant high-pass filter. Noise components

below the specified frequency are cut off.

●

LPF Cutoff Frq

≤ 31.1 Hz … 24.0 kHz.

Sets the cutoff frequency of the throat formant low-pass filter. Noise components

above the specified frequency are cut off.

• Virtually no throat formant sound will be produced if the high-pass filter is set

to a higher cutoff frequency than the low-pass filter.