Owner`s manual

Getting Started

●

Setting Up

Power-on Procedure

Always follow proper procedure when powering-up a sound system to minimize the

possibility of damage to the equipment (and your ears!).

1. Make sure your sound system’s main level/volume control(s) and the VL1-m

volume control are turned all the way down prior to turning power on.

2. Turn on the VL1-m.

3. Turn on your MIDI controller.

4. Turn on the sound system.

5. Raise the sound system volume to a reasonable level.

6. Gradually raise the VL1-m VOLUME control while playing the MIDI controller to

set the desired listening level.

NOTES ■ Most keyboards and other MIDI controllers automatically transmit MIDI

control change data corresponding to their control status when the power switch

is turned ON or OFF. The VL1-m is programmed to receive this data and respond

accordingly, so it is preferable to turn the VL1-m ON

before turning the

controlling device ON.