Owner`s manual

44
Getting Started
●
The Controllers
Maximum
output.
Minimum
output.
Minimum
touch.
Maximum
touch.
127
127
0
0
6. Go to the Pressure Controller Page
From the Vibrato page use the § button to step back to the Pressure controller
page. The touch envelope generator is assigned to control the “Pressure” parameter,
and we will leave it set that way while we experiment with the “Depth” and “Curve”
parameters.
7. Vary the Depth Parameter
Move the cursor to the “Depth” parameter and, while trying out the effect of the
changes on how the “Pressure” parameter is affected by the touch response, use the
data dial to vary to depth setting.
As you decrease the setting, notice that the graph to the right of the display changes
accordingly. The horizontal axis corresponds to touch value (or the control value in any
other controller screen), and the vertical axis represents the depth of the parameter. With
“Depth” set to the maximum value of “127” no touch pressure produces no sound and
maximum pressure produces maximum output.
As the value of the “Depth” parameter approaches zero, however, the depth of the
output range is reduced and a corresponding amount of output is produced even at mini-
mum touch pressure. In other words, at a setting lower than 127 simply playing a key
will produce sound, and touch pressure variations will control output between the initial
level and maximum output.