Operation Manual

No.

C04(36)

Voice Name

SPad: DeepBelPad

EL1: ClickPad EL2: BellVox

EL3: - EL4: -

Comment

Layered voice (eight-note polyphony) combining deep rapid-attack pad with a slow-attack bell pad

Notes

Scene (Foot) Initial Scene No. = 2 1 Layered 2 Normal 3 Heavy

Element1 Element2 Element3 Element4

Param1 (MW1) VibDepth Mellow - - Vibrato depth

Param2 (MW2) HarmVol Stiffness - - Changes bell-pad overtones

Param3 (FC1) AckTone1 Brightness - - Changes bell-pad overtones

Param4 (FC2) AckTone2 HarmVol - - Subtle voice change

Param5 (MBx) Pan - - - One-layer pan

Param6 (MBy) ----

Param7 (CS1) HarmPosit Emerge1 - - Bell pad -> noise

Param8 (CS2) - Emerge2 - - Bell pad -> noise

Param9 (BC) ----

Param10(VEL) Stress Stress - - Stress

Param11(AT) ----

Param12(PB) ----

Param13(TEG) ----

Sustain Enable OFF OFF - -

Portamento OFF OFF - -

Max Notes 8 8 - -

Microtuning Equal_(off) Equal_(off) - -

Effect Type Reverb Hall

One of the VP1's avant-garde, "meditative" pads.

Mixes a rapid-attack pad ("ClickPad") with a slow-attack pad ("BellVox"), and is therefore suitable also for

fast passages. BellVox includes metallic overtones, but you can eliminate these by pushing CS1 and CS2

all the way up, so that only a wind-like noise component remains. Then try moving the two controllers repeatedly

down and back for an interesting and pleasant effect.

The effect is even more pleasant if you also use MB to change the ClickPad pan.

Performance

Hints