Operation Manual

No.

C13(45)

Voice Name

SCmp: ResoMetal

EL1: ResoHarp EL2: -

EL3: - EL4: -

Comment

Decay sound with strong peak

Notes

Scene (Foot) Initial Scene No. = 2 1 Emphatic attack 2 Normal 3 Gentler peak

Element1 Element2 Element3 Element4

Param1 (MW1) VibDepth - - - Vibrato depth

Param2 (MW2) Stiffness1 - - - Moves the peak

Param3 (FC1) HarmPosit - - - Peak volume

Param4 (FC2) HarmVol - - - Peak overtones

Param5 (MBx) ----

Param6 (MBy) ----

Param7 (CS1) Stiffness2 - - - Changes attack's inharmonic overtones

Param8 (CS2) StrMute - - - Changes attack decay

Param9 (BC) ----

Param10(VEL) Stress - - - Stress

Param11(AT) ----

Param12(PB) ----

Param13(TEG) ----

Sustain Enable OFF - - -

Portamento OFF - - -

Max Notes 16 - - -

Microtuning Equal_(off) - - -

Effect Type Reverb Hall

For nice results, hold down the sustain pedal and play leisurely arpeggios. Try to get full advantage from the

abrasive ringing in the lower-range peaks.

Use FC1 and FC2 to alter the peak's timbre and volume, or use CS2 to eliminate the peak entirely. (To familiarize

yourself with these effects, operate the controllers while playing in the lower ranges.)

Try moving MW2 up and back in the upper half of its range (above its midpoint position) to get the sound of a jew's

harp.

Performance

Hints