Operation Manual

No.

C14(46)

Voice Name

SCmp: HardSeq

EL1: HardSeq EL2: -

EL3: - EL4: -

Comment

Synth pad; good for use in sequence patterns

Notes

Scene (Foot) Initial Scene No. = 2 1 Loss of attack 2 Normal 3 Distortion

Element1 Element2 Element3 Element4

Param1 (MW1) VibDepth - - - Vibrato depth

Param2 (MW2) Brilliance - - - Brilliance

Param3 (FC1) HarmPosit - - - Source-wave change

Param4 (FC2) HarmVol ---Distortion level

Param5 (MBx) ----

Param6 (MBy) ----

Param7 (CS1) Stress1 - - - Attack change

Param8 (CS2) Stiffness - - - Controls high metallic overtone (in combination with FC1)

Param9 (BC) ----

Param10(VEL) Stress2 - - - Stress

Param11(AT) ----

Param12(PB) ----

Param13(TEG) ----

Sustain Enable OFF - - -

Portamento OFF - - -

Max Notes 16 - - -

Microtuning Equal_(off) - - -

Effect Type Reverb Hall

At initial selection, this voice produces a tight synth bass. But sliding CS1 upwards adds noisy distortion for a

darker, more violent sound.

FC1 and FC2 produce relatively mild effects when operated separately. But try moving them in unison to obtain

a harsh flanging effect. (If FC1 and FC2 are positioned for maximum flanging, the voice's lower ranges drop off.)

If you are using a sequencer, try recording the notes first, then mixing in the controller signals later.

Performance

Hints