Operation Manual

No.

C15(47)

Voice Name

SCmp: Stormy

EL1: StormComp EL2: -

EL3: - EL4: -

Comment

Digital synth decay with sustain sound

Notes

Scene (Foot) Initial Scene No. = 2 1 Guitar only 2 Normal 3 Stronger noise

Element1 Element2 Element3 Element4

Param1 (MW1) VibDepth - - - Vibrato depth

Param2 (MW2) Brilliance - - - Sustain characteristics

Param3 (FC1) ----

Param4 (FC2) ----

Param5 (MBx) ----

Param6 (MBy) ----

Param7 (CS1) CompVol - - - Volume of decay component

Param8 (CS2) StormVol - - - Sustain volume

Param9 (BC) ----

Param10(VEL) PanSpeed - - - Pan LFO speed

Param11(AT) PanDepth - - - Pan LFO depth

Param12(PB) ----

Param13(TEG) ----

Sustain Enable OFF - - -

Portamento OFF - - -

Max Notes 16 - - -

Microtuning Equal_(off) - - -

Effect Type Reverb Hall

A plucked decay sound combined with a gently modulated pad sound.

(The pad's modulation is independent of the internal effects block.)

Use CS1 and CS2 to balance the decay for the pad and plucked components. But note that dropping both of these

controllers to minimum position will shut off all sound output.

LFO auto-pan is assigned to the aftertouch parameter, so remember to use aftertouch during play.

Performance

Hints