User Guide

No.

A08(08)

Voice Name

SCmp: Sweepy

EL1: Sweepy EL2: -

EL3: - EL4: -

Comment

Bell sound with aftertouch effect

Notes

Scene (Foot) Initial Scene No. = 3 1 Decay 2 Decay + pad 3 Decay + sweep

Element1 Element2 Element3 Element4

Param1 (MW1) VibDepth - - - Vibrato depth

Param2 (MW2) NzVol - - - Noise highlight

Param3 (FC1) ----

Param4 (FC2) ----

Param5 (MBx) ----

Param6 (MBy) ----

Param7 (CS1) CompVol - - - Volume of decay sound

Param8 (CS2) NzVol - - - Volume of noise component

Param9 (BC) ----

Param10(VEL) Stress - - - Stress

Param11(AT) - - -

Param12(PB) ----

Param13(TEG) NzStress - - - Noise emphasis

Sustain Enable OFF - - -

Portamento OFF - - -

Max Notes 16 - - -

Microtuning Equal_(off) - - -

Effect Type Reverb Hall

At initial selection, this voice produces a soft attack followed by metallic harmonics.

(If velocity is very low, you will not hear the harmonics.)

You can use aftertouch to achieve a strong padding image.

For best results, play arpeggios with your right hand while holding down chords (for aftertouch effect) with your left

hand.

Performance Use CS1 and CS2 to alter the balance of the decay and sustain components.

Hints Once you have moved either one of these controllers, sound will be cut off if you then move both controllers

to the full down position.

Aftertouch and MW2 affect the sustain component only.