User Guide

A
09
No.
A09(09)
Voice Name
MKey: HarpBell
EL1: HarpBell EL2: -
EL3: - EL4: -
Comment
Harp timbre with bell-like metallic component mixed in
Notes
Scene (Foot) Initial Scene No. = 2 1 Bell attack 2 Normal 3 Short decay
Element1 Element2 Element3 Element4
Param1 (MW1) VibDepth - - - Vibrato depth
Param2 (MW2) Stiffness1 - - - Harmonics of attack component
Param3 (FC1) StrMute - - - Decay
Param4 (FC2) HarmVol - - - Decay (Clearer than FC1)
Param5 (MBx) ----
Param6 (MBy) ----
Param7 (CS1) Stiffness2 - - - Overall harmonics
Param8 (CS2) HarmPosit - - - Harmonics of attack component
Param9 (BC) ----
Param10(VEL) Stress - - - Stress
Param11(AT) - - -
Param12(PB) ----
Param13(TEG) ----
Sustain Enable OFF - - -
Portamento OFF - - -
Max Notes 16 - - -
Microtuning Equal_(off) - - -
Effect Type Reverb Hall
When first selected, this voice produces a pleasant decay sound, with a bell sound in the high range
and a plucked sound in the low range.
If you move MW2 all the way down, the metallic overtones change into the overtones produced by tapped glass,
while the plucked component becomes thinner.
Use CS1 and CS2 to emphasize and control the plucking sound.
Experiment with MW2, CS1, and CS2 to produce a wide range of sound variation.
Performance
Hints You can use FC1 to cut the peak harmonics. Depress FC2 to reduce the decay and release times for a
more percussive sound.